User manual MAKITA LS0711Z

[. . . ] Slide Compound Saw Equipped with Electric Blade Brake 190 mm (7-1/2") MODEL LS0711Z 002192 DOUBLE INSULATION INSTRUCTION MANUAL WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. SPECIFICATIONS Blade diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 mm (7-1/2") Hole (arbor) diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Miter angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Left 47°, Right 57° Max. [. . . ] To attach the dust bag, fit it onto the dust nozzle. When the dust bag is about half full, remove the dust bag from the tool and pull the fastener out. Empty the dust bag of its contents, tapping it lightly so as to remove particles adhering to the insides which might hamper further collection. NOTE: If you connect a Makita vacuum cleaner to your saw, more efficient and cleaner operations can be performed. 1 3 2 1. Dust bag Securing workpiece · WARNING: It is extremely important to always secure the workpiece properly and tightly with the vise. Failure to do so can cause the tool to be damaged and/or the workpiece to be destroyed. Also, after a cutting operation, DO NOT raise the blade until the blade has come to a complete stop. CAUTION: When cutting long workpieces, use supports that are as high as the top surface level of the turn base. Do not rely solely on the vertical vise and/or horizontal vise to secure the workpiece. Support workpiece over its entire length to avoid blade pinch and possible KICKBACK. 001549 1 2 · 1. Turn base 14 002255 Vertical vise The vertical vise can be installed in two positions on either the left or right side of the guide fence or the holder assembly (optional accessory). Insert the vise rod into the hole in the guide fence or the holder assembly and tighten the screw to secure the vise rod. Position the vise arm according to the thickness and shape of the workpiece and secure the vise arm by tightening the screw. If the screw to secure the vise arm contacts the guide fence, install the screw on the opposite side of vise arm. Make sure that no part of the tool contacts the vise when lowering the handle fully and pulling or pushing the carriage all the way. If some part contacts the vise, re-position the vise. Press the workpiece flat against the guide fence and the turn base. Position the workpiece at the desired cutting position and secure it firmly by tightening the vise knob. CAUTION: The workpiece must be secured firmly against the turn base and guide fence with the vise during all operations. 2 7 6 1 3 4 5 Vise arm Vise rod Guide fence Holder Holder assembly Vise knob Screw 1. 7. · 001807 Horizontal vise (optional accessory) The horizontal vise can be installed on the left side of the base. By turning the vise knob counterclockwise, the screw is released and the vise shaft can be moved rapidly in and out. By turning the vise knob clockwise, the screw remains secured. [. . . ] Magazine/Newspaper From dealer Store display Catalog Other ( ) 2. Construction trade Industrial maintenance Home maintenance Other ( ) 4. Design Features Size Price Makita Brand Power Other ( ) 5. Any comments? Paste Date Purchased Month Day Year 20 Model No. Paste Serial No. Initial Last Name Male Female Single Married Paste Street Address Paste City Province Postal Code Paste AGE: Occupation: Under 19 20-29 30-39 40-49 Over 50 Paste Dealer's Name & Address: 30 Paste Paste Paste Paste Paste Paste Paste Paste Paste Paste Paste Paste Paste Paste Certificate of Warranty Mail to Makita Factory Service Centres Head Office: Regional Office: Regional Office: (Montreal) Dartmouth: Ville St. [. . . ]