User manual MAKITA ML705

[. . . ] WARNING: When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following: Read this instruction manual and the charger instruction manual carefully before use. do not use it in damp or wet locations. A short-circuit can cause a large current flow, overheating, possible burns and even a breakdown. (1) Do not touch the inside of the light with tweezers, metal tools, etc. [. . . ] Charge the battery cartridge with the Makita charger before use. Plug the battery charger into the proper AC voltage source. The charging light will flash in green color. Insert the battery cartridge so that the plus and minus terminals on the battery cartridge are on the same sides as their respective markings on the charger. When the battery cartridge is inserted fully, the charging light will change from green to red and charging will begin. The charging light will remain lit steadily during charging. When the charging light changes from red to green, the charging cycle is complete. After charging, unplug the charger from the power source. Never use it for other purposes or for other manufacturer's batteries. ⷠIf you charge a battery cartridge from a just operated tool or a battery cartridge which has been exposed to direct sunlight or heat for a long time, the charging light may flash in red color. If the charging light flashes alternately in green and red, charging is not possible. The terminals on the charger or battery cartridge are clogged with dust or the battery cartridge is worn out or damaged. cAUTION: · Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Before using battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. CAUTION - To reduce risk of injury, charge only MAKITA rechargeable batteries. Other types of batteries may burst causing personal injury and damage. Non-rechargeable batteries cannot be charged with this battery charger. Use a power source with the voltage specified on the nameplate of the charger. Never carry charger by cord or yank it to disconnect from receptacle. After charging or before attempting any maintenance or cleaning, unplug the charger from the power Always switch off the tool before insertion or removal of the battery cartridge. ⷠTo remove the battery cartridge, withdraw it from the tool while pressing the buttons on both sides of the cartridge. To insert the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. [. . . ] ⷠDo no carry the flash light by flexible leg. This may cause the flash light to drop, resulting in the flash light damage, personal injuries etc. ⷠDo not wind the flexible leg over moving objects such as bicycle to use the flash light. Vibration may cause the flash light to drop, resulting in the flash light damage, personal injuries etc. [. . . ]