Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MAKITA MS30U. We hope that this MAKITA MS30U user guide will be useful to you.
Lastmanuals help download the user guide MAKITA MS30U.
Detailed instructions for use are in the User's Guide.
[. . . ] This will assist you to obtain the best possible result from your DOLMAR Petrol Brushcutter. 23
SYMBOLS
You will note the following symbols when reading the instructions manual. Read instruction manual and follow the warnings and safety precautions!Wear protective helmet, eye and ear protection! [. . . ] As an example to keep the oil gauge clean, it is recommended to insert the oil gauge on its knob side into the engine cover, as shown in Fig. Upper limit (Edge of oil refill port)
Oil gauge If oil adheres around this tip, refill new oil. 3
(1) Keep the engine level, and detach the oil gauge. (2) Fill oil up to the edge of the oil refill port. Feed oil with the lubricant refill container. Insufficient tightening may cause oil leakage. 14
Point 2 in Replacement of oil: “If oil spills out”
– oil spills out between the fuel tank and engine main unit, the oil is sucked into through the cooling air intake port, which will If contaminate the engine. Be sure to wipe out spilt oil before start of operation. REFUELING Handling of fuel
It is necessary to handle fuel with utmost care. fuel may contain substances similar to solvents. Refueling must be performed in a sufficiently ventilated room or in the open air. WARNING: Failure to maintain complete control of the machine at all could result in serious bodily injury or DEATH. 4 UE
– In case of emergency, remove the emergency detachment lever (2) by pulling strongly with a finger. Be extremely careful to maintain control of the machine at this time. Do not allow the machine to be deflected toward you or anyone in the work vicinity. WARNING: Failure to maintain complete control of the machine at all could result in serious bodily injury or DEATH. (2)
Hanger
POINTS IN OPERATION AND HOW TO STOP
Observe the applicable accident prevention regulations!STARTING
Move at least 3 m away from the place of refuelling. Place the Petrol Brushcutter on a clean piece of ground taking care that the cutting tool does not come into contact with the ground or any other objects. a: Cold start
1) Set this machine on a flat space. OPERATION Lock-off lever STOP (1) STOP Throttle lever High speed Low speed Throttle lever MS-245. 4 UE Low speed High speed (1) OPERATION Lock-off lever
16
2) Set the I-O switch (1) to OPERATION. [. . . ] Remove the spark plug, and drip several drops of engine oil through the spark plug hole. Gently pull the starter handle so that engine oil will spread over the engine, and attach the spark plug. Attach the cover to the cutter blade. During storage, keep the rod horizontal or keep the machine upright with the blade edge oriented upward. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA MS30U
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA MS30U will begin.
