User manual MAKITA MS4010

[. . . ] We have the longest experience in the business, and every DOLMAR hedge trimmer benefits from that experience. The HT-2556 D and HT-2576 E models are especially handy and robust hedge trimmers, with plenty of performance and a good power-to-weight ratio. The ergonomic design of the grips and controls make for comfortable and untiring operation during extensive jobs. 4-5 The safety features of the HT-2556 D and HT-2576 E hedge trimmers are the current state of the art and comply with all national and international safety regulations. [. . . ] Doing so will only endanger your safety. Perform only the maintenance and repair works described in the instruction manual. All other work must be carried out by DOLMAR Service. Use only original spare parts and accessories. Using other than original DOLMAR parts or accessories brings a high risk of accidents. We cannot accept any responsibility for accidents and damage resulting from non-DOLMAR parts and accesories which have not been approved. - Do not start working until you have made sure that: b) The trimmer operator can step back unhindered in the event of an emergency. C) The ground is free of all foreign objects, brush, and branches. The operator must have a sure footing (risk of stumbling). First aid For the event of a possible accident, please make sure that a first aid kit is always immediately available close by. Immediately replace any items used from the first aid box. In addition, a long service life and reliable operation with a minimum emission of exhaust gases are ensured. DOLMAR high-performance two-stroke engine oil is available in the following sizes to suit your individual requirements: 1 l order number 980 008 107 100 ml order number 980 008 106 In case DOLMAR high-performance two-stroke engine oil is not available, it is urgently recommended to use a mixture ratio of 40:1 with other two-stroke engine oils, as otherwise optimum operation of the engine cannot be guaranteed. Caution: Do not use ready-mixed fuel from petrol stations. + 1000 cm3 (1 litre) 20 cm3 25 cm3 5000 cm3 (5 litres) 100 cm3 125 cm3 3 3 10000 cm (10 litres) 200 cm 250 cm3 It is not wise to add more engine oil than specified to ensure safe operation. This will only result in a higher production of combus-tion residues which will pollute the environment and clog the exhaust channel in the cylinder as well as the muffler. Starting position for the HT-2576 E Start the trimmer only after it has been completely assembled!Move at least 3 meters (10 feet) away from where you fuelled the trimmer. Make sure you have a secure footing, and place the trimmer on the ground (cutter to the right). The tip of your right foot should be firmly placed on the front grip. Grasp the rear grip firmly from the top with your left hand and tip the trimmer away from yourself until you feel resistance (the cutter will be lifted slightly so that it is not touching the ground). c  Cold start: Move the ON/OFF (I/O) switch (2) to position “I”. [. . . ] In case of damage, have repaired by a qualified service centre immediately Lightly oil Empty and clean Run empty Service, spare parts and guarantee Workshop service The maintenance and repair of modern hedge trimmers as well as all safety devices require qualified technical training and a special workshop equipped with special tools and testing devices. The DOLMAR service centres have all the necessary equipment and skilled and experienced personnel, who can work out costeffective solutions and advise you in all matters. please contact your nearest service centre (list enclosed). All work not described in this Instruction Manual must be done only by a DOLMAR service centre. [. . . ]