User manual MAKITA PS341

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MAKITA PS341. We hope that this MAKITA PS341 user guide will be useful to you.

Lastmanuals help download the user guide MAKITA PS341.


Mode d'emploi MAKITA PS341
Download
Manual abstract: user guide MAKITA PS341

Detailed instructions for use are in the User's Guide.

[. . . ] To install the bit, place it in the chuck as far as it will go. Place the chuck key in each of the three holes and tighten clockwise. Be sure to tighten all three chuck holes evenly. [. . . ] After using the chuck key, be sure to return it to the original position. Switch action CAUTION: Before plugging in the machine, always check to see that the paddle switch actuates properly and returns to the ‘‘OFF’’ position when released. 2) To prevent the switch lever from being accidentally squeezed, a lock-off lever is provided. To start the machine, slide the lock-off lever in the direction of the arrow and squeeze the switch lever. Machine speed is increased by increasing pressure on the switch lever. A speed control screw is provided so that maximum machine speed can be limited (variable). For machines without lock-off lever (Fig. 3) To start the machine, simply squeeze the switch lever. The guide screw makes drilling easier by pulling the bit into the workpiece. € Drilling in metal To prevent the bit from slipping when starting a hole, make an indentation with a center-punch and hammer at the point to be drilled. Place the point of the bit in the indentation and start drilling. Use a cutting lubricant when drilling metals. The exceptions are iron and brass which should be drilled dry. CAUTION: • Pressing excessively on the machine will not speed up the drilling. In fact, this excessive pressure will only serve to damage the tip of your bit, decrease the machine performance and shorten the service life of the machine. € There is a tremendous force exerted on the machine/bit at the time of hole breakthrough. [. . . ] € There is a tremendous force exerted on the machine/bit at the time of hole breakthrough. Hold the machine firmly and exert care when the bit begins to break through the workpiece. € A stuck bit can be removed simply by setting the reversing switch to reverse rotation in order to back out. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA PS341

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA PS341 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag