User manual MAKITA UC4001A

[. . . ] Instruction Manual UC 3001A UC 3501A UC 4001A Important: Read this instruction manual carefully before putting the chain saw into operation and strictly observe the safety regulations!Keep this instruction manual! 1 Thank you for your trust in our product We congratulate you on your new MAKITA electric chain saw. We are convinced that you will be satisfied with this modern machine. MAKITA electric chain saws are characterized by their robust, high-efficiency motors and high chain velocities which allow an excellent cutting efficiency. [. . . ] Do not disconnect the plug by pulling on the power cord. When changing your position during work switch of the electric chain saw and actuate the chain brake in order to prevent an inadvertent start of the chain. When transporting the electric chain saw over long distances the power supply plug must be pulled out and the bar protection cover, included in the delivery, must be applied (20). Ensure safe positioning of the electric chain saw during car transportation to avoid oil leakage. Store the saw in a secure, dry, lockable room out of reach of children. For storing the electric chain saw over a long period of time or shipping it the oil tank must be completely emptied. Only use approved and marked containers for transporting and storing chain oil. For performing maintenance works switch of the electric chain saw, pull out the power supply plug and secure it (21). Before starting to work, always make sure that the saw is in safe working order, in particular the chain brake and runout brake. Make sure that the saw chain is always sharpened and tightened correctly (22). Have the chain brake and run-out brake inspected regularly (see "Chain brake, run-out brake"). Regularly check the cable to the power supply for damage of the covering. If the plastic case is damaged, have it immediately repaired by a skilled person. Regularly check the tank cap for tightness. Do not use the saw if the ON/OFF switch is defective. Observe the accident prevention instructions issued by the competent trade federations and insurance companies. Do not perform any modifications on the electric chain saw. Perform only the maintenance and repair works described in the instruction manual. All other works must be carried out by the MAKITA service. Use only original MAKITA spare parts and accessories. Applying spare parts which are not original MAKITA parts or accesories and bar/chain combinations or lengths results in a high risk of accidents. For accidents and damage resulting from using sawing devices or accesories which have not been approved we cannot accept any responsibility. [. . . ] The MAKITA service centres are provided with all the necessary equipment and skilled and experienced personnel to work out correct customer solutions and to advise you in all matters accordingly. Please contact your nearest service centre (list enclosed). Spare parts A reliable and continuous operation as well as the safety of your chain saw is also subject to the quality of the spare parts used. Use original MAKITA spare parts only, marked: Only original spare parts and accessories guarantee the highest quality in material, dimensions, functioning and safety. Original spare parts and accessories can be obtained from your local dealer. [. . . ]