User manual MAKITA UH5570

[. . . ] WARNING: For your personal safety, READ and UNDERSTAND before using. Model Blade length Strokes per minute Overall length Net weight · Note: Specifications may differ from country to country. Due to our continuing programme of research and development, the specifications herein are subject to change without notice. Polarized Plugs - To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other) and will require the use of a polarized extension cord. [. . . ] Do not attach it in a position closer to the tool beyond the hook complete. Attach firmly one hook of the hook complete to the tool's cord and the other hook of hook complete to the extension cord. Working with the tool with a sole hook only attached may cause an accident and injury. Using the waist cord hook helps to minimizing a risk of cutting off the extension cord unexpectedly caused by the loose extension cord. To trim the hedge in far area with both hands pull the switch triggers A and C. CAUTION: Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Attach firmly one hook of the hook complete to the tool's cord and the other hook of hook complete to the extension cord. Working with the tool with a sole hook only attached may cause an accident and injury. Using the arm cord hook helps to minimize a risk of cutting off the extension cord unexpectedly caused by the loose extension cord. Attach firmly the arm cord hook placing around your arm and pass the extension cord through the holder. Do not pass the extension cord through the band. ⷠDo not force the opening of the holder. Using the arm cord hook together with the waist cord hook is more helpful. Press in or pull out the cord through the opening of the holder. CAUTION: When operating the trimmer, keep extension cord behind trimmer. Never drape it over hedge being trimmed. Be careful not to accidentally contact a metal fence or other hard objects while trimming. The blade will break and may cause serious injury. Overreaching with a hedge trimmer, particularly from a ladder, is extremely dangerous. Do not work from anything wobbly or infirm. Do not attempt to cut branches thicker than 10 mm diameter with this trimmer. These should first be cut with shears down to the hedge trimming level. [. . . ] Remove two screws from the shear blades and the shear blade unit will be taken out. Be careful not to get your hands dirty as grease is applied in the shear blade driving area. CAUTION: Return the gear to the original position in such a manner as it was installed if it should be taken away by mistake. Installing the shear blade Prepare 4 removed screws (For under cover), 2 screws (For shear blade), gear housing cover, under cover, and new shear blades. [. . . ]