User manual MAKITA UM401DW

[. . . ] 16" (406 mm) MODEL UM40lDW Convertlble Rear Bag I Mulching With Charger INSTRUCTION MANUAL SPECIFICATIONS Model UMlOlD Effective cutting width 16" (406 m m ) No load Speed fRPM1 Voltage Dimensions IL x W x HI I 70 Net weight Ibs 3. 800 24v 51 3/4" x 19" x 39 314 I1 316 mm x 482 m m x 1 010 mml 13' kgl Input A C 120V60Hz output D C 24V Charging time Approx 4 Hrs II Manufacturer reserves the right t o change speclfications without notice Note SDecifications mav differ from countrv to countrv IMPORTANT The Lawn Mower Makita Model UM401D employs sealed lead acid batteries Be sure to follow the following instructions t o charge it 1 I Charge the mower immediately after purchase 21 Always recharge the mower after each use without fail 3 Be sure t o charge the mower every six months, when n o t using it for long periods If l e f t 1 uncharged, i t may become unchargeable CAUTION WARNING Read the important safety instructions For your personal safety, READ and UNDERSTAND before using Use only the Makita battery SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE IMPORTANT SAFETY INSTRUCTIONS (For Gardening Appliances) WARNING: WHEN USING CORDLESS TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY, INCLUDING THE FOLLOWING: SAVE THESE INSTRUCTIONS. READ ALL INSTRUCTIONS. 1 . Avoid Dangerous Environment - Don't use appliances in damp or wet locations. Keep Children Away - All visitors should be kept at a distance from work area. 4. Dress Properly - Do n o t wear loose clothing or jewelry. [. . . ] Never carry the charger by cord or yank it t o disconnect from receptacle. 4. Keep cord from heat, oil, chemicals, and sharp edges. Use only a power source of the same voltage as indicated on the nameplate of the charger w h e n charging. 6. Do not attempt t o use a step-up transformer, an engine generator, a DC-AC inverter or DC power receptacle. Charge mower at a room temperature between 5 O C ( 4 1 O F) and 40° C ( 1 0 4 O F). 8. Do not charge in place exposed t o direct sunlight. Do not charge lawn mower i n rain, or in wet locations. 10. Do not allow the charger t o get wet. 11. Do not charge inside a box or container of any kind. 12. Do not charge near volatile, flammable material such as gasoline, paint, gas, adhesive, etc. 13. Do not charge on top of paper, carpet, vinyl sheeting, cloth materials, etc. D o not allow anything t o cover or clog the charger vents. Do not attempt t o insert anything into the vents. Do not touch the charger w i t h wet hands. Stop charging immediately if you notice anything abnormal. Ship or take the charger and the mower t o your nearest Makita Service Center or Distributor for checking them. Do not attempt t o disassemble or make modifications t o the charger. it will take more than specified time to charge the mower *If the mower is left uncharged for more than six months, it may become unchargeable *The indicator does not indicate progress during charge cycle CAUTION Any of the following conditions indicates damages to the charger and/or batteries Unplug the charger from power source and disconnect the charging plug immediately Have them checked by your nearest Makita Authorized or Factory Service Center 1) The charging light remains flashing in green color (does not change to red), although the charging plug is correctly inserted into the charging inlet 2) The charging light color does not change to green in more than 5 hours after you start charging 3) The charging light does not light up or flash in any colors while power is supplied 4) The charging light flashes alternately in green and red color (Probably the batteries are worn out or damaged ) Handle adjustment 1. Turn off the interlock switch and remove the key. If you are recharging the mower, stop recharging and disconnect the charging plug 2 Loosen the clamp nuts on the left and right sides 3 Fit the protrusion of the handle into one of the three square holes according to your preference 4 Tighten the clamp nuts firmly to secure the handle CAUTION Always tighten the clamp nut on the left and right sides Failure to do so may cause the handle to come loose unexpectedly during operation. resulting in serious injury to operator 9 Wheel height adjustment (six steps between 1" and 3-1/2" or 25 mm and 89 mm). 1. Turn off the interlock switch and remove the key. [. . . ] Turn mower on its side and clean grass clippings that have accumulated on the underside of mower deck. Check all nuts, bolts, knobs, screws, fasteners, etc. Inspect moving parts for damage, breakage, and wear. Have repairs made on any damaged or missing parts. [. . . ]