User manual MARANTZ BD5004

[. . . ] BD5004 ENGLISH FRANÇAIS ESPAÑOL Laser Safety CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. LOCATION: INSIDE, NEAR THE DECK MECHANISM. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. THIS PRODUCT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL. The serial number of this product may be found on the back of the unit. [. . . ] 2) Use [ / ] to select "Primary Subtitle", "Secondary Subtitle" or "Subtitle Style", then press [ENTER]. Primary Subtitle Secondary Subtitle Subtitle Style 2 ENG/11 2 ENG/11 2/25 [PURE DIRECT] [MODE] Virtual Surround BD-V DVD-V DVD-VR MP3 WMA CD AVCHD DivX® Note · If you turn off the unit or put this unit to standby mode, the pure direct mode will go back to "Normal". · [PURE DIRECT] is not available when the setup menu is displayed. "Primary Subtitle": Sets the subtitle for the main picture. "Secondary Subtitle": Sets the subtitle for the sub-picture. "Subtitle Style": Sets style of the subtitle. 3) Use [ / ] to select your desired subtitle. 4) Press [SUBTITLE] to exit. You can enjoy stereo phonic virtual space through your existing 2-channel stereo system. 1) During playback, press [MODE] repeatedly until the virtual surround setting appears. Setting the BD Audio Mode Off BD-V BD audio mode is to choose between two ways; you could output the secondary and interactive audio accompanied by the primary audio or you could output the primary audio only. Depending on the setting of the mode, Dolby Digital, DTS, Dolby Digital Plus, Dolby TrueHD, or DTS-HD output changes between Multi PCM and bitstream. 1) In stop mode with BD inserted, press [MODE]. 2) Use [ / ] to select desired setting. DVD-V AVCHD DivX® 1) During playback, press [SUBTITLE]. 2) Use [ / ] to select your desired subtitle. 1 ENG /3 2) Use [ / ] to select "1" (Natural effect), "2" (Emphasized effect) or "Off". 3) Press [RETURN] to exit. Note · Select virtual surround "Off" or lower the volume if the sound is distorted. · This function cannot be used during dialog speed (refer to page 19). · For the virtual surround, audio signal will always be 2-channel PCM. 3) Press [SUBTITLE] to exit. Note · Some discs will only allow you to change the subtitle from the disc menu. Press [TOP MENU] or [POP UP MENU / MENU] to display the disc menu. · If 4-digit language code appears in the subtitle menu, refer to "Language Code" on page 48. · If the disc has no subtitle language or subtitle style, "Not Available" will be displayed. · For DivX®, the screen only displays the number of subtitle languages. "Mix Audio Output" If it is available, BD-Video's secondary and interactive audio will be output with the primary audio. · The secondary audio is the audio for the sub picture (Director's comment etc. ) and the interactive audio is the audio for the interactive application (Button click sounds etc. ). Pure Direct Mode BD-V DVD-V DVD-VR MP3 WMA CD AVCHD DivX® "HD Audio Output" Only the primary audio will be output. Set this mode in order to output Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD sound of BD through HDMI connection. · You can also set "BD Audio Mode" from the setup menu. Refer to page 33. Use this function to shut down unused circuitry to achieve high quality analog sound. [. . . ] - Enter the default password "4737", then your forgotten password will be cleared. Check if the LAN cable connection is properly made. Check if the broadband router and/or modem is correctly connected. Check the "BD-Live Setting". 2 4 3 22 Angle does not switch Playback does not start when the title is selected The password for rating level has been forgotten Cannot connect to the network 36 36 15 ­ 39 15 41 ­ Distorted picture Completely distorted picture or black/white picture with BD/DVD No sound or distorted sound 4 ­ 12, 14, 15 12 33, 34 3 3 3 17 ­ 36 4 ­ ­ 6 ­ 6 6 6 The playback of BD-Video or download of data does not perform properly "HDCP NOK" appears on the front panel display Cannot connect to the network while my PC is connected to the network Cannot use the BD-Live function - Check the content of your Internet service contract to see if your Internet Service Provider prevents multiple terminals connecting at the same time. [. . . ]