User manual MARANTZ CD 4000 SERVICE MANUAL

[. . . ] Heed Warnings ­ All warnings on the product and in the operating instructions should be adhered to. Follow Instructions ­ All operating and use instructions should be followed. Cleaning ­ Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. [. . . ] It can also switch the time display during play. It can display how much time has elapsed and how much play time remains for the current track as well as how much play time remains for the whole disc. t 3 (play) button This is used to start play. y 8 (pause) button This is used to temporarily suspend play. !9 SCROLL/RECALL button u 7 (stop) button This is used to stop the play. This is used to scroll the text display when text is displayed. When it is pressed during program play, it is possible to check which tracks have been programmed. 10 NAMES AND FUNCTIONS Rear panel ANALOG OUT L AC IN IN R OUT EXTERNAL INTERNAL F A B C D E A ANALOG OUT (analog output) connectors The music signals during play are output from these connectors. E EXTERNAL/INTERNAL switch Before the player was shipped from the factory, this switch was set to INTERNAL to enable the remote sensor built into the player to be used. Before using the supplied connecting cable to make the connection between the player and the remote control connectors on a Marantz equipment, set the switch to EXTERNAL. Note: Signals cannot be received from the remote control unit if the switch is kept at EXTERNAL when the player is to be used on its own. B DIGITAL OUT COAX. (digital coaxial output) connector The music signals during play are output digitally from this coaxial output connector. * Digital signals are not output during pitch control play. C DIGITAL OUT OPT. (digital optical output) connector The music signals during play are output digitally from this optical output connector. * Digital signals are not output during pitch control play. F AC POWER SOURCE CONNECTION Plug the mains lead into a mains outlet providing the right voltage. D REMOTE CONTROL IN and OUT connectors Using the supplied remote control connecting cable, these connectors enable this player to be connected to a Marantz component equipped with remote control connectors. These connections make it possible to control an entire system that centers on the amplifier or other such component. 11 ENGLISH DIGITAL OUT COAX. Press the REPEAT button on the remote control unit. PITCH RESET PITCH RESET · Playing a specific part repeatedly (A-B repeat) This function repeatedly plays a specific part of a track that you want to hear. 1. During play, press the A-B button on the remote control unit at the start point of the part to be repeated. AMS A-B REPEAT AMS A-B REPEAT The "RPT" indicator on the display lights, and the repeat play of all the tracks starts. 55 5 The "A-" indicator on the display now lights. Display example: A-B repeat , point A (start), track 1, 5 sec. 55 12 34 56 78 9 10 11 12 13 14 15 16 17 18 To stop all-track repeat play and resume normal play, press the REPEAT button on the remote control unit twice. The "RPT" indicator on the display goes off. 12 34 56 78 9 10 11 12 13 14 15 16 17 18 2. · Playing one track repeatedly (1-track repeat) This function repeatedly plays one track only. Even during random play or program play, it repeats the track being played. Press the REPEAT button on the remote control unit twice while the track to be repeated is playing. PITCH RESET Press the A-B button on the remote control unit at the end point of the part to be repeated. PITCH RESET AMS AMS A-B REPEAT The "A-B" indicator on the display now lights, and the designated part (from point A to point B) is played repeatedly. Display example: A-B repeat , point B (end), track 1, 20 sec. 5 55 The "RPT" and "1" indicators light, and track now playing is repeated. 5 55 TTL TRK TTL TRK 12 34 56 78 5 555 RPT 1 TIME 12 34 56 78 9 10 11 12 13 14 15 16 17 18 To stop A-B repeat play and resume normal play, press the AB button on the remote control unit to turn off the "A-B" indicator on the display. Note: The A-B repeat play function cannot be used during random play. To stop 1-track repeat play and resume normal play, press the REPEAT button on the remote control unit to turn off the "RPT" indicator on the display. 5 555 A­ B 9 10 11 12 13 14 15 16 17 18 5 5 TTL TRK RPT TIME 5 TTL TRK A­ TIME A-B REPEAT TIME 15 ENGLISH 55 55 5 5 ADVANCED OPERATIONS Random play (playing tracks in a random sequence) This function rearranges the tracks into a random sequence and it then plays all the tracks in this random sequence. If it is used together with repeat play, the same tracks can be repeatedly played but in a different sequence every time. During play or stop, press the RANDOM button on the remote control unit. PROGRAM CANCEL AMS play (searching for a specific track) This function comes in handy when searching for a specific track that you want to hear. You can choose whether to play 10, 20 or 30 seconds of each track. [. . . ] (440 (W) x 89 (H) x 317 (D) mm) Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8. 14 lbs (3. 7 kg) Allowable operating temperature . . . . . . . . . . . . . . . . . . . . . . . +5 to +35°C Allowable operating humidity . . . . 5 to 90% (no condensation) This player's specifications and exterior are subject to change without notice for improvements. Dimensions (unit: inch (mm)) 1/4 (6) 17-5/16 (440) CD PLAYER CD 4000 1/2 (13) PLAY OPEN/CLOSE STOP PAUSE DISC TTL RNDM TRK RROG A­ B RPT 1 PITCH EDIT PEAK TTL TIME STANDBY POWER ON/STANDBY TEXT 12 34 56 78 9 10 11 12 13 14 15 16 17 18 19 20 TIME EDIT PEAK DISPLAY OFF PHONES LEVEL 1/2 (13) 3-1/2 (89) 12-1/2 (317) 27 ENGLISH 10. [. . . ]