User manual MARANTZ CD5000

[. . . ] R Model CD5000 User Guide CD PLAYER CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. This unit employs a laser, Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. LASER SAFETY CAUTION USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURE OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. 2 English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Français. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] or · Use the digits 0­9 on the remote control to key in the number of a track. y CD play continues with the selected track. Selecting a track when CD play is stopped 1 Briefly press PREV. or · Use the digits 0­9 on the remote control to key in the number of a track. y Playback starts with the selected track. Searching for a passage during CD play 1 Hold down PREV. or NEXT § to find a particular passage in a backward or forward direction. 2 Release the button when you have reached the desired passage. Note: In the shuffle and repeat mode and when playing a program, searching is only possible within the particular track. Repeating the CD, a track or a program 1 Press repeatedly REPEAT on the remote control during CD play. y The display shows the different repeating modes. REPEAT 1: the current track is played repeatedly. REPEAT: the entire CD or program (if available) is played repeatedly. 2 Press REPEAT until the display indication disappears to return to normal CD play. Note: It is possible to activate the different playing modes at the same time, e. you can repeatedly play the entire CD or program in random order (PROGRAM REPEAT SHUFFLE). Repeating a part of the CD 1 Press PLAY 2 to start CD play. 2 Press REPEAT A/B on the remote control to mark the beginning of the passage to be repeated. y REPEAT is shown and A- is flashing in the display. 3 Press REPEAT A/B on the remote control to mark the end of the passage to be repeated. The part of the CD between the marked points is played repeatedly. 4 Press PLAY 2 to return to normal CD play. 9 English Random order playing (SHUFFLE) ADDITIONAL FUNCTIONS Clearing the program 1 If necessary press STOP 9 to stop program playing. PROG EDIT PEAK English 10 HIGHLIGHT CD TEXT SHUFFLE FADE SCROLL TIME 2 Press STOP 9 to clear the program. y PROGRAM CLEARED scrolls through the display, PROGRAM disappears and your program is cleared. Note: The program will also be cleared if you open the tray. Programming track numbers You can select a number of tracks and store these in the memory in the desired sequence. [. . . ] The sequence of the tracks stays as the original. 1 Insert a CD and, if desired, program track numbers. or NEXT § to switch through the different scan modes. 4 As soon as the desired edit mode is displayed press EDIT. [. . . ]