User manual MARANTZ CD5001OSE

[. . . ] Model CD5001/CD5001OSE User Guide CD Player CLASS 1 LASER PRODUCT LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT TEXT ENGLISH WARRANTY For warranty information, contact your local Marantz distributor. RETAIN YOUR PURCHASE RECEIPT Your purchase receipt is your permanent record of a valuable purchase. It should be kept in a safe place to be referred to as necessary for insurance purposes or when corresponding with Marantz. IMPORTANT When seeking warranty service, it is the responsibility of the consumer to establish proof and date of purchase. [. . . ] PEAK button When the PEAK button is pressed, searching for the loudest passage (peak) on a CD or in a program. /0 DISPLAY OFF button This is used to turn off the display (DISPLAY OFF mode). When it is pressed, the display is turned off; when it is pressed again, the display comes on. x Disc tray This is where the CD to be played is placed. c OPEN/CLOSE 0 button This is used to open and close the disc tray. When it is pressed, the disc tray opens; when it is pressed again, it closes. /1 PLAY 3 button This is used to start play. /2 STOP 7 button This is used to stop play. v Remote sensor This senses the infrared control signals sent from the remote control unit. /3 PAUSE 8 button This is used to temporarily suspend play. b DISPLAY OFF indicator This lights in the DISPLAY OFF mode (when the display is off). /4 4 /1 (previous track/search backward) 1 button When this button is pressed, play returns to the start of the track now being played. The same number of tracks as the number of times the button is pressed can be skipped in the reverse direction. When the button is held down, tracks are searched (fast backward). n Display This shows the settings, play status, text information, etc. m TIME button Switches the time shown on the display to the remaining time of the current track or the remaining time of the entire disc. With a CD-TEXT disc, this switch is also used to switch the displayed information from the text display mode to the time display mode. ¢ /5 ¡/¢ (search forward/next track) button The same number of tracks as the number of times the button is pressed are skipped in the forward direction. When the button is held down, tracks are searched (fast forward). , EDIT button Press to engage the editing function, which helps record a disc onto a tape by playing the tracks according to the tape length and leaving a nonrecorded blank of 4 seconds between every track. /6 PHONES jack The headphones are connected to this jack. Use headphones that come with a standard plug. /7 PHONES LEVEL control This is used to adjust the headphones volume level. The level increases when it is turned clockwise. 8 NAMES AND FUNCTIONS cde DISC f TTL gh RNDM TRK i j kl m PROG A­ B RPT 1 PITCH nopq EDIT PEAK TTL TIME TEXT 12 34 56 78 9 10 11 12 13 14 15 16 17 18 19 20 ab r a Main display This displays the time information and text information of the disc played, the setting menus, etc. k RPT (repeat) indicator This lights during repeat play. l 1 (1-track repeat) indicator b TEXT indicator This lights when a disc supporting CD-TEXT has been loaded. This lights during 1-track repeat play. m PITCH (pitch control) indicator Lights up when the pitch control function is set and active. c 8 (pause) indicator This lights when play is temporarily suspended. n EDIT indicator This lights during edit mode. d 3 (play) indicator This lights during play. o PEAK indicator This lights during peak search and playback of the peak. e DISC indicator This flashes during readout of the table of contents (TOC) information on the disc. p TTL (total time) indicator When the total remaining time or total program time is displayed, this lights above that display. f TTL (total track) indicator This lights above the display of the total number of tracks recorded on the disc. q TIME indicator This lights while the elapsed time or other such time is displayed. g RNDM (random) indicator This lights during random play. r 1 - 20, (music calendar) h TRK (track) indicator This lights above the display of the number of the track being played, etc. This displays the track numbers recorded on the disc, the track numbers still to be played, and the track numbers programmed for program play. i PROG (program) indicator This lights during program play. j A-B (A-B repeat) indicator This lights during A-B repeat play. 9 ENGLISH Display NAMES AND FUNCTIONS Remote control unit i 1, ¡ (search) buttons 1 : This button is used to search backward when it is held down during play. ¡ : This button is used to search forward when it is held down during play. ENGLISH DISPLAY POWER q 1 2 5 8 0 RANDOM QUICK REPLAY !2 3 6 9 CANCEL o PITCH -/RESET/+ (pitch control down/reset/ up) buttons These are used to adjust the play speed (pitch) with a ± 12 step. w 4 7 PROGRAM !0 AMS (auto music scan) button !3 !4 !5 This is used to play the intros of all the tracks in sequence starting from the first track for the duration equivalent to the setting. e r t y u i !1 TEXT button This is used to switch the main display from the time display to the text display. PITCH RESET !2 POWER button REPEAT o !0 !1 AMS A-B SCROLL/ RECALL TEXT TIME !6 !7 !8 !9 This is used to switch the player's power ON and STANDBY. !3 CANCEL button This is used to cancel the programmed tracks. !4 QUICK REPLAY button REMOTE CONTROLLER RC5400CD Press the button to return to the position 10 seconds before the current playback position and restarts playback from there. !5 4, ¢ (track skip) buttons q DISPLAY button This is used to turn off the display (DISPLAY OFF mode). 4 : Use this to return to the start of the track now playing or return to the start of the previous track. ¢ : Use this to advance to the start of the subsequent track. w Numeric buttons (0 to 9) These are used to specify the numbers of the tracks to be played. !6 REPEAT button This is used to play one track or all the tracks on the disc repeatedly. e PROGRAM button This is pressed to initiate program play. !7 A-B (A-B repeat) button This is used to set start point (A) and end point (B) when a particular section is to be played repeatedly. r RANDOM button This is used to play the tracks in a random sequence. t 3 (play) button This is used to start play. !8 TIME button This switches the main display from the text display to the time display. It can also switch the time display during play. It can display how much time has elapsed and how much play time remains for the current track as well as how much play time remains for the whole disc. y 8 (pause) button This is used to temporarily suspend play. u 7 (stop) button This is used to stop the play. !9 SCROLL/RECALL button This is used to scroll the text display when text is displayed. When it is pressed during program play, it is possible to check which tracks have been programmed. 10 NAMES AND FUNCTIONS F A B C D E A ANALOG OUT (analog output) connectors The music signals during play are output from these connectors. E EXTERNAL/INTERNAL switch Before the player was shipped from the factory, this switch was set to INTERNAL to enable the remote sensor built into the player to be used. Before using the supplied connecting cable to make the connection between the player and the remote control connectors on a Marantz equipment, set the switch to EXTERNAL. Note: Signals cannot be received from the remote control unit if the switch is kept at EXTERNAL when the player is to be used on its own. B DIGITAL OUT COAX. (digital coaxial output) connector The music signals during play are output digitally from this coaxial output connector. * Digital signals are not output during pitch control play. C DIGITAL OUT OPT. (digital optical output) connector The music signals during play are output digitally from this optical output connector. * Digital signals are not output during pitch control play. F MAINS CONNECTION Plug the mains cord into a mains outlet providing the right voltage. D REMOTE CONTROL IN and OUT connectors Using the supplied remote control connecting cable, these connectors enable this player to be connected to a Marantz component equipped with remote control connectors. [. . . ] 5 to 90% (no condensation) This player's specifications and exterior are subject to change without notice for improvements. Dimensions (unit: mm) 9 269 440 DISC TTL RNDM TRK RROG A­ B RPT 1 PITCH EDIT PEAK TTL TIME 72 15 5 TEXT 12 34 56 78 9 10 11 12 13 14 15 16 17 18 19 20 87 283 27 10. TROUBLESHOOTING If you think that something is wrong with your player, first check the points listed below. Incorrect operations can sometimes be taken for trouble and malfunctions. If the trouble persists even after the following points have been checked, consult your dealer or nearest Marantz sales office or service center. [. . . ]