User manual MARANTZ CDR510

[. . . ] Model CDR510 User Guide CD Recorder/CD Player ® CLASS 1 LASER PRODUCT LOUKAN 1 LASERLAITE KLASS 1 LASERAPPARAT Recordable Warnings and Cautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. LASER SAFETY This unit employs lasers. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CAUTION USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURE OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. -2- GROUND CLAMP ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) GROUNDING CONDUCTORS (NEC SECTION 810-21) POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) WARNINGS Do not expose the equipment to rain or moisture. [. . . ] The REMOTE EXT / INT (IR) switch (a) on the back of the CDR510 must be at INT (left position) for the infrared remote to work. See Remote batteries on page 9 for installing or changing the remote batteries. Most of the controls on the remote work identically to the control on the unit. The page number describing identical functioning unit controls is given below. Further instruction is supplied for controls that are on the remote only or that function differently from controls on the unit. CD - R CD After the second press the currently playing disc is repeated. The display says REPEAT ALL. REPEAT ALL Example display REPEAT ALL 3 4 56 7 DIG CD - R L R CD 89 10 11 12 13 14 15 16 17 The third press cancels Repeat playback. PROG. 5. button Works the same as the PROG button, see page 13. 1 3 4 5 6 TRAY DOOR 2 OPEN/CLOSE REPEAT PROG. RANDOM ABC DEF GHI TRAY OPEN/CLOSE 6. RANDOM button In playback, in CHANGER mode only, push and release to enter RANDOM playback. Tracks are played at random, from either drive, for playback. Playback will randomly switch drives, putting the other drive in Play pause. RANDOM RANDOM 2 MN 1 JKL 3 OPQ 4 RST 5 UVW 6 XYZ 7 DISPLAY 8 SPACE 9 SCROLL 0 CDR MENU CD CANCEL TR. TRAY OPEN/CLOSE button Push and release to open or close the currently selected disc drive tray. Standby power button Not used. Example display RANDOM 123 DIG 56 7 8 10 11 12 L R 13 15 16 17 CHANGER CD - R CD Track 12 is playing. Tracks 4, 9 and 14 have been randomly played on the CD drive. SCAN DIMMER ENTER REMOTE CONTROLLER RC2100DR After a track is played it is removed from being randomly chosen again until all tracks on both drives have been played. If RANDOM and REPEAT ALL are combined tracks are played randomly until all tracks have been played. Then tracks are re-randomized and play continues. - 25 - 7 TRAY OPEN/CLOSE ABC RANDOM GHI DEF GHI TRAY OPEN/CLOSE DOOR REPEAT PROG. RANDOM DOOR REPEAT PROG. 8 9 10 11 12 ABC DEF 1 JKL 2 MN 3 OPQ 4 RST 5 UVW 6 XYZ 13 1 JKL 2 MN 3 OPQ ABC DEF GHI 1 JKL 2 MN 3 OPQ 4 RST 5 UVW 6 XYZ 7 DISPLAY 8 SPACE 9 SCROLL 0 CDR MENU 4 RST 5 UVW 6 XYZ CD CANCEL 7 ENTER 8 SPACE 9 14 15 7 DISPLAY 8 SPACE 9 SCROLL 0 CDR MENU CD CANCEL TR. INCR. REC REC TYPE SOURCE SCAN DIMMER 0 7. Alphanumeric keypad Performs some of the functions of the REC LEVEL / SELECT control. SCAN DIMMER ENTER 16 17 18 19 20 REMOTE CONTROLLER RC2100DR REMOTE CONTROLLER RC2100DR In Playback and Program modes push and release a number button to select the track. Then push the REC LEVEL / SELECT control on the unit or ENTER on the remote to enter the selection. When entering CD Text push a number button once to select the first of the three letters, twice for the second and three times for the third. Push the REC LEVEL / SELECT control on the unit or ENTER on the remote to enter the selected number. DISPLAY 14. PAUSE button Push and release to Pause recording or playback on the currently selected drive. [. . . ] Except as specified below, this warranty covers defects in material and workmanship. The following are not covered under warranty: 1. Damage, deterioration, malfunction or failure to meet performance specifications resulting from: a) Accidents, acts of nature, misuse, abuse, neglect or unauthorized product modification. b) Improper installation, removal or maintenance, or failure to follow supplied instructions. [. . . ]