User manual MARANTZ DV7010

[. . . ] ENGLISH CONGRATULATIONS ON YOUR PURCHASE OF THIS FINE MARANTZ PRODUCT. MARANTZ is on the leading edge of DVD research for consumer products and this unit incorporates the latest technological developments. We are sure you will be fully satisfied with the DVD player. WARNING: Do not expose the equipment to rain or moisture. Do not remove the cover from the equipment. [. . . ] To remedy this condition, select either [4:3 (Letter Box)] or [4:3 (Pan & Scan)]. "Wide" setting 26 ENGLISH Selecting Picture Quality Appropriate for Program Content ­ DVD/Video CD This lets you select the ideal picture quality for watching movies, animation and other video media. Make changes to the [Picture Quality] setting in the Setup screen Video menu. Turning the on-screen display on or off If you would rather not have the operation indicators (Play, Stop, Resume, etc. ) and other messages displayed on the screen, it is possible to turn them off in the [On Screen Display] setting in the Setup screen Video menu in the [Expert] menu mode (page 23). Audio1 Audio2 Video Language General TV Screen ­ 16:9(Wide) Picture Quality ­ Standard Still Picture ­ Field On Screen Display On OSD Position - Normal Off Angle Indicator ­ On Move SETUP Audio1 Audio2 Video Language General TV Screen ­ 16:9(Wide) Picture Quality Cinema Animation Standard Adjust picture quality Move SETUP Exit Exit Settings: On* Off * Factory setting Settings: Cinema Provides a sharp, clear black picture for images with high contrast. Animation Provides images with bright clear colors. Standard* Presents the video with no effect added. * Factory setting Setting the position of the on-screen display When watching conventional software on a wide screen TV, the operation display is at the very top of the screen, and may be difficult to see. Changing the position of the display lets you see operation indicators clearly even on a wide screen TV. Make changes in the [OSD Position] in the Setup screen Video menu in the [Expert] menu mode (page 23). Selecting the type of paused image to display This function lets you view a clear still-image when DVD playback is paused. Make changes in the [Still Picture] setting in the Setup screen Video menu in the [Expert] menu mode (page 23). ADJUSTING AUDIO AND VIDEO SETTINGS Audio1 Audio2 Video Language General TV Screen ­ 16:9(Wide) Picture Quality ­ Standard Still Picture ­ Field On Screen Display ­ On OSD Position Wide Angle Indicator- Normal Move SETUP Audio1 Audio2 Video Language General TV Screen ­ 16:9(Wide) Picture Quality - Standard Still Picture Field On Screen Display - Frame OSD Position - Normal Auto Angle Indicator ­ On Move SETUP Exit Exit Settings: Wide Normal* * Factory setting Settings: Field (Picture shake will be eliminated during a paused picture. ) Frame (Select to obtain higher picture quality. ) Auto* (Selects field or frame automatically according to the disc. ) * Factory setting Note This setting is only effective with DVDs that contain a 4:3 aspect ratio video presentation. 27 ENGLISH Viewing from a Desired Camera Angle (Multi-Angle) ­ DVD You can select a camera angle when viewing DVDs with the multi-angle option. Turning the angle indicator on and off When a picture recorded in different angles is played back is displayed on the screen. This setting lets you see clearly whether the playback picture is recorded in multiple angles or not. Turn the angle indicator on or off in the [Angle Indicator] setting in the Setup screen Video menu in the [Expert] menu mode (page 23). RETURN ENTER Audio1 Audio2 Video Language General TV Screen ­ 16:9(Wide) Picture Quality ­ Standard Still Picture ­ Field On Screen Display ­ On OSD Position ­ Normal Angle Indicator On Off SETUP Exit Move ANGLE SUBTITLE AUDIO ANGLE PROGRAM OSD SETUP DIMMER LAST MEMORY CONDITION MEMORY Settings: On* ( REMOTE CONTROLLER RC7010DV is displayed) * Factory setting Off (Not Displayed) Note Even when the [Angle Indicator] setting is set to [Off], the indicator in the display panel of the player lights during multi-angle playback. Therefore, it is possible to know when the multi-angle function can be used without having to display the icon on the screen. Press ANGLE during playback. The camera angle changes each time you press the button. ANGLE : 1/4 ANGLE : 2/4 \ » ANGLE : 4/4 ANGLE « : 3/4 | Notes · You can use the Multi-Angle function only with discs featuring recordings of images shot from different camera angles. · During Multi-Angle playback, the indicator in the display lights. · For some discs, selection can be made using the DVD menu. In this case, press MENU to display the DVD menu screen and then make your selection. To check whether or not a disc is recorded with angles: The jacket of discs that are recorded with angles will be marked with . When locations on discs that are recorded with angles are played back, the indicator can be displayed. To cancel the angle mark, set [Angle Indicator] to [Off] in the Setup screen Video menu described in the section below. 28 ENGLISH Setting the Language Options DVDs have the capacity to contain a great deal of audio information, which includes the ability to hold up to 8 different language tracks and subtitle information in as many as 32 different languages. This section outlines the variety of audio language and subtitle options available with this player. Notes · DVDs differ in content and do not all contain multiple language or subtitle information. Therefore making settings in this section may have no effect on some DVDs. · If you have already completed the Setup Navigator screen operations, the settings on this page have already been set by the player. Setting Language and Subtitle Preferences in the Setup Screen Menus The Setup screen Language menu contains a number of settings related to the audio and subtitle language preferences. Selecting an audio language preference The audio language that you normally listen to can be selected from the various audio languages on a DVD. Even when the audio language is changed during playback by pressing AUDIO, the language selected at this setting will be selected as the default when the DVD is changed. Make changes to the [Audio Language] setting in the Setup screen Language menu. Setting the on-screen display (OSD) language This setting is used to establish the language that operation indicators and on-screen messages and operations display. [. . . ] 200 mVrms (1 kHz, ­20 dB) Number of channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA jacks Digital audio characteristics Frequency response . . . . . . . . . . . . . . . . . . . . . . . . 4 Hz to 44 kHz (DVD fs: 96 kHz) S/N ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]