Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MARANTZ MOUNT20. We hope that this MARANTZ MOUNT20 user guide will be useful to you.
Lastmanuals help download the user guide MARANTZ MOUNT20.
Detailed instructions for use are in the User's Guide.
[. . . ] Model MOUNT20
User Guide
VP-12 Series Projector Ceiling Mount
MOUNT20
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE INSTALLING EQUIPMENT
This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of.
1. [. . . ] Make sure not to block any ventilation openings when installing the projector. Special techniques and experience are required when installing the projector with this mount. Contact your dealer to install the projector for you. Once the projector is installed, safety checks should be conducted on a regular basis.
8 5/8"
VP-12 SERIES PROJECTOR CEILING MOUNT
INSTALLATION INSTRUCTIONS
Step 1 Base Plate Connectors #1 and Projector Mount Ceiling Plate 1 with ceiling mounting holes #2.
Figure 1
1 4
Ceiling Wire Access
4
14"
2
3 2
3
2
Plate 1
Base Plate Connectors #1 Projector Mount Ceiling Plate 1
Insert Base Plate connectors #1 into the lateral positioning slots #3 as shown in #4 from the underside of Plate 1. The lateral positioning slots will give you 2 1/4" inches of lateral adjustment for projector alignment.
Warning
The ceiling should be capable of supporting a weight of at least five (5) times the projector(s) weight. If it cannot, the ceiling must be reinforced. Proper installation procedure by qualified personnel as outlined in the installation instructions must be adhered to. Failure to do so could result in serious personal injury.
Step 2 Horizontal Adjustment Plate 2 (Base Plate Connector Holes #3).
Figure 2
3
3
Wire Access
10 5/8"
Hardware List
1. Four (4) 3/8 (inch) nuts Four (4) 3/8 (inch) flat washers Two (2) 8 (mm) screws Eleven (11) 6 (mm) screws Eight (8) 6 (mm) rubber washers 6. One (1) Ceiling Mount #1 Two (2) Base Plate Connectors One (1) Horizontal Tilt Plate #2 One (1) Horizontal Tilt Plate #3 One (1) Projector Plate #4
3
3
7 5/8"
Adjustment Ranges and Load Allowances
Horizontal Tilt (yaw) Vertical Tilt (tilt) Rotation Lateral Shift Maximum Load Allowance +/+/+/+/10 degrees 20 degrees 15 degrees 21/4 inches 450 Lbs.
Plate 2
Base plate connector holes #3 provide 15 degrees of horizontal rotation adjustment. Attach horizontal adjustment Plate 2 to projector mount ceiling Plate 1 using the four (4) 3/8" (inch) nuts and washers provided.
MOUNT20 PROJECTOR CEILING MOUNT
INSTALLATION INSTRUCTIONS continued
Step 2 B Horizontal Adjustment Plate 2 (Figure 2) attached to Projector Mount Ceiling Plate 1. Figure 3 Step 3 B Horizontal Tilting Plate 3 Attached to Plates 1 and 2. [. . . ] Lift and slide the projector onto the 6 (mm) screws previously installed in the metal studs of the plate on the ceiling (see arrow in Figure 7). Tighten the 6 (mm) screws on both sides of the mount and install four (4) 6 (mm) screws and washers into the side of the projector Mounting Plate 4.
Sequence of Assembly of Projector Mounting Plates
Plate 1
Step 2
Plate 2
Step 3
Plate 3
Step 4
Plate 4
1100 Maplewood Drive Itasca, IL 60143 Phone: 630 741-0300 Fax: 630 741-0301
You can find your nearest authorized distributor or dealer on our website at: www. marantz. com Printed in Canada 2004
Dimensions
PLATE #1
14. 00" 5. 5" 5. 5" 0. 9"
10. 0" 1. 7" 3. 8" 7. 0" 8. 5" 3. 15" 1. 0" 2. 5"
CEILING SIDE
2. 75"
2. 5" 3. 8" 1. 7"
Base Plate Connectors
6. 50" 5. 00" 1. 375"
You can find your nearest authorized distributor or dealer on our website at: www. marantz. com
1100 Maplewood Drive Itasca, IL 60143 Phone: 630 741-0300 Fax: 630 741-0301
Printed in Canada 2004 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MARANTZ MOUNT20
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MARANTZ MOUNT20 will begin.
