User manual MARANTZ PM-15S2

[. . . ] Model PM-15S2 User Guide Integrated Amplifier CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] 19) . v VOLUME Buttons PHONO BALANCED CD 3 : This button increases the volume level. 4 : This button decreases the volume level. RECORDER 1 LINE 1 z b DISPLAY Button x This button turns the display ON and OFF. RECORDER 2 LINE 2 TRIM EXIT TONE , m L + R n Cursor Buttons In the Trimming Mode These buttons are for selecting the channel to trim and the trimming level. 2/R : This button selects the R channel for trimming. 1/L : This button selects the L channel for trimming. 3/+ : This button increases the trimming level. 4/­ : This button decreases the trimming level. n ENTER DISPLAY - ATT b VOLUME c v Other than the Trimming Mode 2, 1, 3, 4 and ENTER: These buttons are for selecting settings items on menu displays of Marantz DVD players, etc. For operations of supported Marantz products, see the tables on the 20 page and the instruction manual of the Marantz component. . RANDOM SCAN REPEAT TOP MENU RETURN MENU AM/A FM/B m EXIT Button This button ends the trimming mode when trimming is finished. , TRIM Button This button starts the various trim adjustments. 18) When multiple units are connected by F. C. B. S. , this button selects the unit with which to perform trimming. . Component Operating Buttons These buttons are for operating Marantz Super Audio CD players, DVD players, etc. For operations of supported Marantz products, see the tables on the 20 page and the instruction manual of the Marantz component. 6 ENGLISH REAR PANEL q w ert y ui o PHONO PHONO GND CD L PRE OUT L P. DIRECT IN L F. C. B. S. SPEAKER SYSTEMS SPEAKER IMPEDANCE : 4 - 8 OHMS BI. AMP STEREO IN OUT R IN 1 LINE 2 L IN R R R CH L CH 1 RECORDER 2 L R IN IN IN OUT IN OUT R !2 !1 q PHONO GND Terminal !0 u AMP MODE Switch STEREO : Set to use this unit as a normal two-channel stereo amplifier. BI-AMP : Set to use this unit in complete bi-amp connection. For STEREO COMPLETE BI-AMP mode, see page 13. Connect the grounding wire from an analog record player here. w PHONO IN Jacks These jacks are for connecting to an analog record player. Both MC and MM cartridges can be used, therefore set the PHONO MC button on the front panel according to the type of cartridge you are using. i F. C. B. S. IN/OUT Jacks These jacks are used to connect and synchronize up to four amplifiers. For instructions on use and connections, see F. C. B. S. 16). e CD IN Jacks These jacks are for connecting to the output jacks of a Super Audio CD player, etc. o AC IN Socket Connect this socket to the power outlet using the included power cord. r PRE OUT Jacks These jacks are for connecting to the input jacks of another main amplifier or active subwoofer. !0 RECORDER 1/2 Output Jacks These jacks are for connecting to the recording input jacks of a tape deck etc. t P. DIRECT IN Jacks These input jacks are used when this unit is used as a power amplifier in power amplifier direct mode. Connect your preamplifier to these jacks, if you have them. During power amplifier direct mode, the volume cannot be changed. !1 RECORDER 1/2 Input Jacks These jacks are for connecting to the output jacks of a tape deck or other type of recording device. y SPEAKER SYSTEMS Terminals These terminals are for connecting a speaker systems. Speaker output can be turned ON/OFF from the SPEAKERS button on the front panel. When in bi-amp mode, the signals input into the L channel are output from both channels. !2 LINE 1/2 IN Jacks These jacks are for connecting to the output jacks of a tuner, DVD player, etc. 7 OTHERS TROUBLESHOOTING ADVANCED OPERATIONS ADVANCED CONNECTIONS BASIC OPERATIONS BASIC CONNECTIONS NAMES AND FUNCTIONS NAMES AND FUNCTIONS ENGLISH BASIC CONNECTIONS CONNECTING AUDIO COMPONENTS Notes: · Do not connect this unit and other components to mains power until all connections between components have been completed. · Insert all plugs and connectors securely. · Be sure to connect the left and right channels properly. [. . . ] Check that the remote cable is properly connected. ADVANCED CONNECTIONS BASIC OPERATIONS Assign different ID numbers to the amplifiers. BASIC CONNECTIONS ¶ At power on When multiple amplifiers are connected by F. C. B. S. , the error messages described in the table below may be displayed on the display. In such a case, ID number setting or remote cable connection may be in failure. Check the ID number or remote cable connection, referring to the table below. For details on ID number setting, see "HOW TO SET ID NUMBERS", on page 17. NAMES AND FUNCTIONS TROUBLESHOOTING ENGLISH OTHERS SPECIFICATIONS Power output (20 Hz ­ 20 kHz simultaneous drive of both channels) (8 load) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 W x 2 (4 load) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 W x 2 Headphone rated output (When speaker rated output set to 8 load) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120mW x 2 (32 load) Total harmonic distortion (20Hz ­ 20kHz simultaneous drive of both channels, 8 load). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 05 % Output band width (8 load, 0. 05%) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]