User manual MARANTZ PMD570

[. . . ] Model PMD570 User Guide Solid State Recorder ® Warnings and Cautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. -2- Important Safety Instructions READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. Read Instructions ­ All the safety and operating instructions should be read before the product is operated. [. . . ] Example display shows change to 32 kbps. Push and release the Jog Wheel when correct. kbps kHz 5. While RecFormat is flashing push and release the Jog Wheel. Channel information, Stereo or continues - 29 - How to set or change the RecFormat parameters continued 1 2 Bal. In, Unbal. or Dig-In Pushing and releasing the Jog Wheel with bwf selected switches to the column 7 default (wav). Turn the Jog Wheel to switch between . wav and . bwf. 3 4 5 6 7 . wav/ . bwf Example display Note: Choosing wav in column 6 results in a WAV format file with a . wav extension. Choosing wav in column 7 results in a BWF format file with a . wav extension. When correct, push and release the Jog Wheel. The display returns to RecFormat flashing. PCM MP2 Stereo MP3 PCM MP2 Mono MP3 - - - (1536) 48 - - - (1412) 44. 1 - - - (1024) 32 - - - (768) 24 22. 05 - - - (704) - - - (512) 16 48 44. 1 384, 256, 192, 128, 96, 64 32 48 44. 1 320, 256, 160, 128, 80, 64 32 24 22. 05 320, 256, 160, 128, 80, 64 16 - - - (768) 48 - - - (705. 6) 44. 1 - - - (512) 32 24 - - - (384) 22. 05 - - - (352) 16 - - - (256) 48 192, 128, 96, 64, 48, 32 44. 1 32 48 44. 1 160, 128, 80, 64, 40, 32 32 24 22. 05 160, 128, 80, 64, 40, 32 16 . wav/ . bwf . mpg/ . bwf . mp3/ . bwf . mp3 . wav/ . bwf . wav/ . bwf 12. If you are done making Menu changes to the Preset, push and release the MENU/STORE button to save your changes, . wav/ . bwf . wav/ . bwf . mpg/ . bwf . mp3/ . bwf . mp3 . wav/ . bwf . wav/ . bwf Stored is displayed briefly. (or push and release the Stop CANCEL button to cancel all changes). 10. The file extension for the chosen file format will be flashing (Col. While the file extension is flashing turn the Jog Wheel to tab through available file format choices. Example display Note: If BWF is chosen an additional step (Col. 7) permits choosing between a . bwf or . wav file extension. Example display with bwf selected at Col. 6. - 30 - Pre Record When PreRecord is on and the PMD570 is in record pause, it 'listens to' the selected audio input(s) and continuously buffers 2 seconds of audio. When recording begins the 2 second pre record buffer is written at the beginning of the new track. The 2 seconds give you time to precisely start recording without missing the first seconds of audio. From stop push and release the MENU/STORE button. Turn the Jog Wheel to select Preset1, 2 or 3. Push and release the Jog Wheel to accept the selected Preset. [. . . ] Except as specified below, this warranty covers defects in material and workmanship. The following are not covered under warranty: 1. Damage, deterioration, malfunction or failure to meet performance specifications resulting from: a) Accidents, acts of nature, misuse, abuse, neglect or unauthorized product modification. b) Improper installation, removal or maintenance, or failure to follow supplied instructions. [. . . ]