User manual MARANTZ PMD670

[. . . ] Model PMD670 User Guide Portable Solid State Recorder ® Warnings and Cautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. -2- Important Safety Instructions READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. Read Instructions ­ All the safety and operating instructions should be read before the product is operated. [. . . ] Press and release the FWD/+ button to tab to another menu the -/REW button choice, or 8b. Press and release the MENU/STORE button to write the menu changes and return to stop mode, or to 8c. Press and release the CANCEL button cancel any menu changes and return to stop mode. The Menu choices are: Date/Time ­ For setting or changing the Date and Time associated with when an audio track (file) was created. DateForm ­ For selecting the date order. Algor/File ­ For setting or changing the recording compression algorithm, associated bit rate, audio file type, and channels recorded. Track ­ Turn manual track incrementing feature on or off. SeamlsPly ­ Turn the Seampless play feature on or off. S. Skip ­ Turn Silent Skip feature on or off, set the number of seconds the dB level must meet or exceed the set threshold, and set the dB threshold level. A. Cue ­ Turn the Auto Cue feature on or off, set the number of micro-seconds the dB level must meet or exceed the set threshold, and set the dB threshold level. S. Play ­ Turn the single track play feature on or off. A. PowOff ­ Enable or disable the Automatic Power Off feature. Batt_Type ­ Set the battery type. RemoteMode ­ Set the effect of the optional wired remote switch. ID1 ­ Set the description ID code for broadcast wave file recordings. ID2 ­ Set the origin ID code for broadcast wave file recordings. ID3 ­ Set the origin reference ID code for broadcast wave file recordings. Default ­ Reset all Menu settings to factory default settings. How to set or change the Date and time The date and time are written on each audio track (file) when the track is started. When an audio track is viewed on a computer this date and time appears as when the file was 'modified'. From stop, press and hold the MENU/ STORE button for about 2 seconds. MENU will appear (flashing) in the display. TIME Example display: REC REMAIN L -dB R 00 40 20 12 6 2 0 over -dB INT MIC 2. While MENU is flashing (for about 3 seconds) press and release the ENTER button . [. . . ] Except as specified below, this warranty covers defects in material and workmanship. The following are not covered under warranty: 1. Damage, deterioration, malfunction or failure to meet performance specifications resulting from: a) Accidents, acts of nature, misuse, abuse, neglect or unauthorized product modification. b) Improper installation, removal or maintenance, or failure to follow supplied instructions. [. . . ]