User manual MARANTZ PMD671

[. . . ] Model PMD671 User Guide Portable Solid State Recorder Warnings and Cautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAITION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. [. . . ] When the hour and AM/PM is correct, press and release the ENTER button . With the minute flashing, press and release or the -/F. REV the F. FWD/+ button to tab through minutes. When the button minute is correct*, press and release the ENTER button . Date/Time will be flashing. *To set time correct to the second, set to the next minute and wait for that minute to begin before pressing the ENTER button . or 9. Press and release the MENU/STORE button. If you have made changes to the date and/or time, Stored will be displayed briefly. The display will return to stop mode. Note: The date and time settings will remain for about 5 years if the AC Adapter is not plugged in and no batteries are installed. Date Form The Date Form is the date order month/day/year or day/month/year. The US default is M/D/Y (month/day/year). The Europe default is D/M/Y (day/month/year). - 27 - Beep When battery charge can provide no more than 1-3 minutes of recording or playback and Beep is set to On, the CHARGE indicator, REC indicator and the battery indicator in the display will flash, and the PMD671 will beep through the headphones or speaker. If the PMD671 is not operated for 30 minutes during stop or play pause, power can be automatically shut off to conserve battery life. (See A. PowOFF. ) If A. PowOFF is set to Yes, and Beep is set to ON, the PMD671 will beep to alert you that the power is shutting off. How to set or change the Beep Quick instructions Press & hold MENU/STORE 2 sec . . . . . . . Preset Press F. FWD/+ 3X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Beep Press ENTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Off or On Press F. FWD/+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Off or On Press ENTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Beep Press MENU/STORE . . . . . . . . . . . . . . . . . . . . From stop, press and hold the MENU/ STORE button for about 2 seconds. Preset will appear (flashing) in the display. While Preset is flashing, press and release the F. FWD/+ button repeatedly until Beep is displayed. Press and release the ENTER button The On-Off choice will flash. Press and release the F. FWD/+ button to toggle between the -/F. REV button On and Off. [. . . ] The following are not covered under warranty: 1. Damage, deterioration, malfunction or failure to meet performance specifications resulting from: a) Accidents, acts of nature, misuse, abuse, neglect or unauthorized product modification. b) Improper installation, removal or maintenance, or failure to follow supplied instructions. c) Repair or attempted repair by a non-Marantz authorized agent. [. . . ]