User manual MARANTZ SA8001

[. . . ] Model SA8001 User Guide Super Audio CD Player CLASS 1 LASER PRODUCT LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. LASER SAFETY This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CAUTION : USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURE OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPON-DANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. [. . . ] If the button is pressed more times, the track being played is skipped back. : Each time this button is pressed, the track being played is skipped forward. * Search buttons are provided separately for the remote control unit. Use /9 Search buttons for search function. ¤6 MENU button and ENTER button (Menu setup) These buttons are used to set the time for quick replay. (See page 11) ¤6 /9 , (Search buttons) ¤7 Q. REPLAY (Quick replay) button This button is used to do quick replay of the tracks. (See page 11) REMOTE CONTROLLER RC8001SA : While this button is pressed during playback, tracks are searched backward. : While this button is pressed during playback, tracks are searched forward. * In this instruction manual, some operations can only be performed with the remote control. For operations that can be performed with buttons both on the main unit and on the remote control, the button names are shown in the mark. And for operations that can only be performed with buttons on the remote control, the button names are shown in the mark. 5 ENGLISH REMOTE CONTROLLER b SOUND MODE button ¤0 SCROLL/RECALL button ¤8 , button REAR PANEL ENGLISH F ANALOG OUTPUT L R AC IN DIGITAL AUDIO OUT OPT. OUT REMOTE CONTROL A BCD E D REMOTE CONTROL IN, OUT (input and output) connectors When the remote control connectors on the player and on a Marantz AV component are connected using the accessory remote control connecting cables, the components can be operated as a system by remote control. · When connecting to a component which is equipped with remote control connectors, the player's REMOTE CONTROL IN connector must always be connected to the REMOTE CONTROL OUT connector on the other component to be connected. · When connecting a component which is not equipped with an infrared remote sensor, this component must always be connected to the player's REMOTE CONTROL OUT connector. A ANALOG OUTPUT connectors These are the output jacks of the analog audio signals. The supplied analog connection cord can be connected to the CD, AUX, or other connectors on an amplifier. Be sure to connect the L and R channels correctly to the corresponding jacks. * Never connect to the PHONO connector on the amplifier. F AC POWER INPUT JACK Connect the supplied power cord to this jack and a household AC power outlet. B DIGITAL AUDIO OUT OPT. It outputs the playing Audio CD signal in digital format. This jack is to be connected with a recording device, amplifier, D/A converter, etc that has optical digital input using an optional square type optical digital cable. * No signal will be output when a Super Audio CD is played. E EXT. /INT. (Ext. /Internal switch) When this unit is used as a standalone component, set this switch to the INT. When it is used connected to external component by a remote connecting cable and to audio component with a remote sensor that supports remote controls by Marantz, set this switch to the EXT. * If the unit is used as standalone and the switch is set to EXT. position, remote control unit cannot be used. C DIGITAL AUDIO OUT COAX. It outputs the playing Audio CD signal in digital format. This jack is to be connected with a recording device, amplifier, D/A converter, etc that has coaxial digital input using an optional coaxial digital cable. [. . . ] * In timer play mode, tracks are played normally. e Set the audio timer. · The disc is rotating but no sound is heard. Are the amplifier and speakers connected properly?Is the amplifier's function or selector switch set to "CD" or "AUX" or such (to whatever you have connected this unit to)? [. . . ]