User manual MARANTZ SA8004

[. . . ] The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. [. . . ] Basic connections Basic connections nn Analog connection (vpage 7) nn Connecting the power cord (vpage 7) Digital audio input If a device equipped with CD transport or digital audio output is connected to this unit, this unit can be used as a D/A converter. (“Using as a D/A converter” (vpage 18)) Digital audio output You can enjoy digital recording when the player is connected to a CD recorder or other digital recording component. CD recorder / MD recorder OPTICAL IN COAXIAL IN Basic operation Basic operation Preparations Connecting cables Select the cables according to the equipment being connected. Advanced connections Advanced connections Advanced connections Audio cables Optical digital connections Optical digital connection cable (Sold separately) Optical cable (sold separately) Coaxial digital connections Signal flow Coaxial digital connection cable (Sold separately) Signal flow Advanced operations Advanced operations Coaxial digital cable (sold separately) iPod connections NOTE Signals on the HD layer of the super audio CD and MP3 or WMA signals recorded onto the disc cannot be output in digital output. Signals that can be output using digital output are digital audio signals from audio CDs, CD-layers of super audio CDs, USB, iPod, PC, COAXIAL, and OPTICAL. explanation of terms Explanation of terms iPod cable (sold separately) PC connections CD Transport or digital device etc. Troubleshooting Troubleshooting USB cable (sold separately) Remote control connection When connecting the optical digital output connector with an optical transmission cable (sold separately) NOTE • Linear PCM signals with a sampling frequency of 32kHz, 44. 4kHz, or 192kHz can be input into this device. € Do not input signals other than linear PCM signals, such as Dolby digital, DTS, AAC etc. Doing so may cause noise, which may cause damage to the speakers. Specifications Specifications Remote connector cord (supplied) Match the shapes then insert firmly. Indd 12 2011/02/10 8:34:59 ENGLISH USB memory device/iPod connection Connect a USB memory device/iPod to the USB port on the front panel of this unit. PC connection nnSupported iPod Models Made for • iPod touch (3rd generation) • iPod touch (2nd generation) • iPod touch (1st generation) • iPod classic • iPod with video • iPod nano (5th generation) • iPod nano (4th generation) • iPod nano (3rd generation) • iPod nano (2nd generation) • iPod nano (1st generation) • iPhone • iPhone 3G • iPhone 3GS By connecting a computer to the USB port on the rear panel of this unit using a commercially available USB connecting cable, this unit can be used as a D/A converter. (“Using as a D/A converter” (vpage 18) The unit USB cable (Sold separately) USB port Type B Signal flow Type A Computer installed with a media player iPod cable (Sold separately) NOTE When using an USB memory device, do not use an USB extension cable. When connecting an iPhone to this unit, keep the iPhone at least 7 7/8 inches (20 cm) away from this unit. If the iPhone is kept closer to this unit and a telephone call is received by the iPhone, noise may be output from this device. Plug that fits the shape of the connection device connector 13 1. Indd 13 2011/02/10 8:35:00 ENGLISH Remote control connection When you use this unit connected to a Marantz amplifier, this unit receives operation signals sent from the amplifier and operates accordingly. Advanced operations Symbols used to indicate buttons in this manual Button located on both the main unit and the remote control Button only on the main unit Button only on the remote control Getting started Getting started Playback of MP3 and WMA files There are many music distribution sites on the Internet allowing you to download music files in MP3 or WMA (Windows Media® Audio) formats. The music (files) downloaded from such sites can be stored on CD-R or CD-RW discs and played on the unit. €Windows Media” and “Windows” are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. Basic connections Basic connections n Connection Use the supplied remote connection cable to connect the REMOTE CONTROL IN terminal of this unit to REMOTE CONTROL OUT terminal of the amplifier. [. . . ] USB memory device formatted with a display. Device below 128 MB cannot compatible file system be supported. (FAT32 or FAT16) and that has at least 256 MB of memory. € No file able to be played on this • Check supported formats. [. . . ]