User manual MARANTZ SD 8020 SERVICE MANUAL

[. . . ] Open the downloaded file in your PC and follow the on screen instructions to install the editor. Notes: You can install Wizz. it 3 together with other Marantz editors. The files of Wizz. it 3 are automatically placed in a separate directory. CUSTOMIZING THE CONFIGURATION FILE During the installation of the editor, one configuration file was also saved on your PC. There is one default configuration file which you can start from to create a custom configuration file (CF) (defaultRC3001. mcf). The default CF is constructed in such a way that they can be easily adjusted to the needs of every customer. [. . . ] !0 Paste This pastes a selected setting. !1 Delete This deletes a selected setting. !2 Label This is used to set the label of a selected device or button. !3 Properties This is used to set the properties of a selected device or button. !4 Add new device This adds a new device. it Simulator This simulates on the PC the remote controller that was set. !7 Clock Sync This synchronizes the internal clock of the remote controller with the internal clock of the PC. !8 Help The User Manual is displayed as a PDF file. 3 RC3001_E_Wizzit3_ENG. indd 3 07. 9. 12 8:58:56 AM EDITING A NEW CONFIGURATION FILE Use the procedure below to make the settings when using a new configuration file. 1. 2. Click the New Configuration icon. Click the Add new device icon, and add the number of devices to match the number of devices to be controlled. The devices are registered automatically starting from Device 1 on the Home page for the number of devices that were set. Double-click the HOME icon, and then select and double-click Page1. In the sleep time setting, the sending of commands is set by the remote controller. (Refer to the RC3001 User Guide. ) o Test IR This performs a test transmission of IR commands from the remote controller connected to the PC from IR codes selected in the action list. 5 RC3001_E_Wizzit3_ENG. indd 5 07. 9. 11 5:05:21 PM ADD IR CODE WINDOW y q t w e r q Learn IR This is used to learn the remote control codes from other remote controllers and set them in the action list. (Refer to page 7, Learning IR . ) w My Database This loads and sets the IR codes registered in My Database. Specify the file saved in the PC to load the IR codes registered in My Database. e IR Database This loads and sets the IR codes from the IR Database containing the remote codes from various brands. (Refer to page 8, IR Database Window . ) r RC5/6 This uses direct key input to set the remote control codes RC-5, RC-5 Extension, RC-6 mode 0, RC-6 mode 6A used by Marantz. (Refer to page 9, Edit RC5/RC6 Window (Direct Input Code . ) t Test IR This performs a test transmission of IR commands by sending a preset code from the remote controller connected to the PC. y Duration This is used to adjust the duration of the IR command. 6 RC3001_E_Wizzit3_ENG. indd 6 07. 9. 3 1:38:30 PM LEARN IR 1. Use a USB cable to connect the PC making the settings to the remote controller (RC3001/ RC2001). 2. 5. Place the remote controller so that its infrared signal transmitter is facing the infrared signal receiver on the remote controller at a distance of about 2 inches (0. 05 m). Click the Learn IR icon in Add IR Code Window . Send the remote controller code that you want to learn. [. . . ] q Name This allows setting of a name of up to 9 alphanumeric characters, symbols, or icons in length. To select, click the input characters in the key area. w A This is used to enter uppercase letters. t Horizontal Alignment This is used to select the display position of the entered characters. 12 RC3001_E_Wizzit3_ENG. indd 12 07. 9. 3 1:38:31 PM LEFT SIDE SOFT BUTTON SETTING In the default settings, the action (Action List) for the left-side soft buttons has the same setting as the right-side soft buttons. [. . . ]