User manual MARANTZ SR-14MKII

[. . . ] R Model SR-14mkII User Guide AV Surround Receiver ENGLISH WARRANTY For warranty information, contact your local Marantz distributor. RETAIN YOUR PURCHASE RECEIPT Your purchase receipt is your permanent record of a valuable purchase. It should be kept in a safe place to be referred to as necessary for insurance purposes or when corresponding with Marantz. ITALIANOI Condizioni di garanzia L'apparecchio e' garantito per 365 giorni dalla data di acquisto comprovata da un documento attestante il nominativo del rivenditore e la data di vendita. La garanzia sara' prestata con la sostituzione o riparazione gratuita delle parti difettose. [. . . ] To determine each source, display the desired source and press the < or > button. OUT : Select the digital source from the DIGITAL output with < or > button for digital dubbing to a CD-R recorder or MD deck. The source is switched in the following sequence. SOURCE DIG. 1 DIG. 2 DIG. 3 DIG. 4 OFF SOURCE To determine each source, display the desired source and press the ^ or v button. This product is equipped with a TV-auto ON/OFF system, which automatically turns on or off the SR14mkII power 1 second (for ON) and up to to 5 minutes (for OFF) after the TV video input signal is present or absent. Switch the TV AUTO ON/OFF function to enable or disable with or button. To use this function, connect the TV video input to TV tuner's video output. If you select enable, SR-14mkII will display the status of the feature (Volume up/down, input select, etc. . ) on the TV monitor. But if you do not desire this information , select "DISABLE ". System Power Control : If you select "ENABLE", the SR-14mkII will output a power On/Off command for a CD player, MD player, or DVD player, from the remote output terminal. If you have corresponding marantz products , you can turn them on/off simultaneously with SR-14mkII. 6 channel direct inputs on the SR-14mkII share the front channel of the desired source. Select the desired source with < or > button. The input of the Digital 6 terminal is commonly used with an AC-3 RF input or Coaxial Digital Input. If Digital 6 is connected to the AC-3 RF output of a LD player, select " RF " with < or > button. If you desire to connect this terminal to the digital output of a CD player, DVD player, SAT tuner or etc. . . select " COAXIAL ". Example: When the digital output of a DVD player is connected to Digital 4 (input jack) of the SR-14mkII and an AC-3 RF output and optical digital output from a LD player are connected to AC-3 RF(Dig. 6) and Dig. 1. Move the cursor on the DVD with ^ or v button, and select DIGITAL4 with <, > button. Move the cursor on the "LD" with ^ or v button, and select RF with < button, and select DIGITAL1 with > button. (Move the cursor with ^ or v button, input is determine. ) Notes · The TUNER and AUX are fixed to the analog input, and cannot be selected for any digital input. The RF input is available for LD , and can be linked with Digital 1, 2, 3 , 4 or 5. If the RF input is linked with any Digital input, once the RF signal is not supplied, the SR-14mkII will switch from the RF input to the digital input automatically. [. . . ] Box 49, Doha, Qatar 180 Rue du Marechal Leclerc, 97400 Saint Denis, Ile de la Reunion 5, Zagazului Str. Bl. 1G, apt. 18, sector 1, Bucharest, Romania 7/2, Montazhnaya Street, 107497 Moscow, Russia P. O. Box 2154, Alkhobar 31952, Saudi Arabia Wo Kee Hong Centre, 29 Leng Kee Road, Singapore 159099, Singapore Nam. SNP 10, 96001 Zvolem, Slovakia Smartinska 152, HALA V/3, 61000 Ljubljana, Slovenia P. O. [. . . ]