User manual MARANTZ SR6001

[. . . ] Model SR6001 User Guide AV Surround Receiver CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. Read Instr uctions ­ All the safety and operating instructions should be read before the product is operated. [. . . ] 38 PL x MUSIC PARAMETER PARAMETER :DEFAULT P. 38 NEO:6 PARAMETER CENTER GAIN : 0. 3 4. PANORAMA :OFF DIMENSION :0 CENTER WIDTH: 3 Select the desired menu item with the 3 or 4 cursor buttons, set the desired level with the 1 or 2 cursor buttons, and press the ENTER button. RETURN RETURN NEXT EXIT NEXT EXIT RETURN NEXT EXIT HT-EQ: Select to active the HT-EQ with the 1 or 2 cursor buttons. The tonal balance of a film soundtrack will be excessively bright and harsh when played back over audio equipment in the home. This is because film soundtracks were designed to be played back in large movie theater environments. Activating the HT-EQ feature when watching a film made for movie theaters corrects this and restores the correct tonal balance. The HT-EQ feature is available except in the following modes. · 7. 1 CH INPUT · PURE-DIRECT · When Dolby Virtual Speaker is set for the surround mode LFE LEVEL: Select the output level of the LFE signal included in the Dolby Digital signal or the DTS signal. Select "0dB", "­10 dB" or "OFF" with 1 or 2 cursor button. After you complete this portion of the setup, move the cursor to "RETURN" with the 3, 4, 1, 2 cursor buttons and press the ENTER button. SURROUND MODE: The surround mode can be independently set for 3 modes. Others CHANNEL LEVEL CENTER LEVEL: Set the effect level of the center speaker between ­12 and +12 level in 0. 5 level interval . · If "NONE" was selected for the center speaker setting in the SPEAKER SIZE, then this setting will not appear. SURR L or R LEVEL: Set the effect level of the Surround speaker between ­12 and +12 level in 0. 5 level interval . · If "NONE" was selected for the surround speakers setting in the SPEAKER SIZE, then this setting will not appear. BACK L or R LEVEL: Set the effect level of the Surround Back speaker between ­12 and +12 level in 0. 5 level interval . · If "NONE" was selected for the surround back speakers setting in the SPEAKER SIZE, then this setting will not appear. Note: · After you complete this portion of the setup, press the ENTER button to move the cursor to "RETURN" and press the ENTER button again to go to sub-menu. 37 ENGLISH 3 SURROUND SETUP 3. SURR SETUP 3-1 CHANNEL LEVEL SUB W LEVEL: Set the effect level of the subwoofer speaker between ­18 and +12 level in 0. 5 level interval . · If "NONE" was selected for the subwoofer speaker setting in the SPEAKER SIZE, then this setting will not appear. Note: · Setting to a mode other than multichannel stereo or CSII will affect the speaker level as explained in "2-2 MANUAL SETUP". After you complete this portion of the setup, move the cursor to "RETURN" with the 3, 4, 1 and 2 cursor buttons and press the ENTER button to go to the 3. SURR SETUP menu. 3-2 PLIIx (PRO LOGIC IIx) MUSIC PARAMETER Pro LogicIIx-Music mode creates a rich and enveloping surround ambience from stereo sources such as CDs. In this mode, the SR6001 includes three controls to fine-tune the sound field as follows. setting in the SPEAKER SIZE menu, this setting cannot be selected. After you complete this portion of the setup, move cursor to "RETURN" with the 3, 4, 1 and 2 cursor buttons and press the ENTER button. 3-4 NEO:6 PARAMETER The DTS NEO:6 mode enables a maximum 6. 1 channel output with just 2 channel input. (It also supports 5. 1 channel input. ) This mode expands the sound image from the center channel. ENGLISH 1. Select "3. [. . . ] 2005, 2009, 2020, 2035, 2057 Sampo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2008, 2012, 2022, 2024, 2027 Sanyo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2050, 2052 Sharp. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2044, 2045 Sherwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2051 Sony . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2001, 2013, 2059 Toshiba . . . . . . . . . . . . . . . . . . . . . . 2004, 2008, 2026, 2028 Yamaha . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2046, 2060 Zenith . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]