User manual MARANTZ SR6400

[. . . ] Model SR6400 User Guide AV Surround Receiver CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. Read Instructions ­ All the safety and operating instructions should be read before the product is operated. [. . . ] To set the distance for each speaker , press the or cursor buttons. After you complete this portion of the set up, move the cursor to "NEXT" with the or cursor buttons and then press the OK button to go to the next page. Note: · The speaker level settings are not available in 6. 1 channel input mode and S-Direct mode. 2 - 3 S P E AK E R S L E V E L T E S T MOD E F RON T L C E N T ER F RON T R S UR R . L S UB W MA I N R E T U RN : : : : : : : : MANUA L 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB EX I T After you complete this portion of the set up, press the OK button, the cursor will move to "MAIN" and then press the OK button to go to SETUP MAIN MENU. Notes: · Speakers that you selected "None" for in the Speaker Size menu will not appear. · To adjust the speaker levels for 6. 1-channel input sources, you will need to use the 6. 1CH-INPUT sub menu. (See page 18). Note: · TV-AUTO and RS-232C are disabled in the "ECONOMY" setting. TV AUTO: Select the TV AUTO ON/OFF function to enable or disable with the or cursor buttons. (refer to page 23) OSD Info: Select the OSD information function to enable or disable with the or cursor buttons. If you select "ENABLE", the SR6400 will display the status of the feature (Volume up/down, input select, etc. . ) on the TV monitor. But if you do not desire this information, select "DISABLE ". After you complete this portion of the set up, move the cursor to "MAIN" with the or cursor buttons and press the OK button. FRONT L : Set the distance from the front left speaker to your normal listening position between 1 and 30 feet in 1. 0 foot intervals (0. 3 to 9 meters in 0. 3meter intervals). FRONT R : Set the distance from the front right speaker to your normal listening position between 1 and 30 feet in 1. 0 foot intervals (0. 3 to 9 meters in 0. 3meter intervals). CENTER : Set the distance from the center speaker to your normal listening position between 1 and 30 feet in 1. 0 foot intervals (0. 3 to 9 meters in 0. 3-meter intervals). TEST MODE : Selects "MANUAL" or "AUTO" for generating the mode of the test tone with the or cursor buttons. If you select "AUTO" , the test tone will be cycled through in a circular pattern which is Left Center Right Surround Right Surround Back Surround Left Subwoofer Left . . increments of 3 seconds for each channel. Using the or cursor buttons, adjust the volume level of the noise from the speaker so that it is the same level for all the speakers. 17 ENGLISH ENGLISH 2-2 SPEAKERS DISTANCE SURR. L: Set the distance from the surround left speaker to your normal listening position between 1 and 30 feet in 1. 0 foot intervals (0. 3 to 9 meters in 0. 3meter intervals). R : Set the distance from the surround right speaker to your normal listening position between 1 and 30 feet in 1. 0 foot intervals (0. 3 to 9 meters in 0. 3meter intervals). SUB W : Set the distance from the subwoofer to your normal listening position between 1 and 30 feet in 1. 0-foot intervals (0. 3 to 9 meters in 0. 3-meter intervals). BACK: Set the distance from a surround back speaker to your normal listening position between 1 and 30 feet in 1. 0-foot intervals (0. 3 to 9 meters in 0. 3-meter intervals). If you select "MANUAL", adjust the output level of each speaker as listed below. 4 SURROUND 4 S UR ROUND : AU T O : : : : : : : OF F 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB EX I T S URR . MOD E H T - EQ L FE LEVEL C EN T ER S URR L S URR R S URR B AC K S UB W MA I N 1. 2. Select "SURROUND" in the SETUP MAIN MENU with the or cursor buttons, and press the OK button. To select a desired content , press the or cursor buttons. SURR R LEVEL: Set the level of the Surround right speaker between ­10 and +10 dB level in 1dB level intervals. · If "None" was selected for the Surround right speaker setting, in the Speaker size set up menu, then this setting will not appear. [. . . ] 168 mV/ 47 Kohms Signal to Noise Ratio(Analog Input / Source Direct) . . . 105 dB Frequency Response (Analog Input / Source Direct) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Hz - 100 kHz (± 3 dB) (Digital Input / 96 kHz PCM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Hz - 45 kHz (± 3 dB) 5-3/4 ins. [. . . ]