User manual MARMITEK 8IN1UNIVERSAL REMOTE CONTROL

[. . . ] [2] Power: Works in the same way as your original remote. also used to switch all Marmitek X-10 Lamp Modules on. [3] Set-up: Used for entering code numbers matching your TV, VCR or other equipment. [4] Learn: Lets you learn IR commands from an existing remote, that might not be in the Marmitek 8 in 1 library. [. . . ] Your AUX button is now equal to a TV, VCR, CBL, SAT or CD button, depending on what mode you chose at step 3. Searching for codes: When your device cannot be found in the code list, or your device doesn't respond to any of the codes you entered, you can try to find the code you need by using the `searching for codes' method: 1. Press and hold SETUP until the LED indicator lights steadily. Press CHANNEL+ repeatedly until the device to be controlled changes channel. If you go past the code accidentally press REW [<<] to step back (for first step push button twice). Press and release the ENTER button to complete the set-up. Note: You may have to press CHANNEL+ many times (50+). If the device does not have a Channel Up function, use the PLAY [>] button (VCR only) or the POWER button. Identifying codes found using the search procedure: 1. Press and hold SETUP until the LED indicator lights steadily. To find the first digit, press each number button from 0 to 9 until the LED blinks. The number you pressed is the first digit of the code. Press each number button from 0 to 9 as above to find the second digit. Press each number to find the third digit. When the third digit has been found, the LED will go out. Write down the found code on the label of the battery compartment. However, if the code for your particular device is not found in the library, you can learn these codes from your existing remote. Or if you find a code from the tables in this manual that "almost" matches your device, but a few buttons are missing, you can learn just those buttons. Point your existing remote at the Marmitek 8 in 1 remote (front to front) with a distance of about 5 centimetres between the remotes. Press and hold SETUP until the LED indicator lights steadily. Press and release the button on the Marmitek 8 in 1 remote that you want to teach. (Press SHIFT first to learn a shifted function). [. . . ] Press and hold SETUP until the LED indicator lights steadily. Controlling your equipment from any place in your home Your remote is prepared to work together with the Marmitek Powermid receiver. With this receiver its possible to control audio and video equipment from another room or even outside the house, using your Marmitek 8 in 1 remote control. Just plug the receiver into the wall socket and place it in line of sight of your equipment. [. . . ]