User manual MARMITEK CONNECT420

[. . . ] dispose of batteries as chemical waste. Never use old and new batteries or different types of batteries together. Remove the batteries when you are not using the system for a longer period of time. Check the polarity (+/-) of the batteries when inserting them in the product. [. . . ] Deep Color 36-bit (billions instead of millions of colours, better reproduction of subtle gradation variances and higher contrasts). Connect the power adapter to the Connect420 and plug into the electrical socket. Pull the plastic strip out of the battery compartment on the remote control in order to activate the battery and enable use of the remote control. Remove the protective film (prevents scratching) on top of the remote control and from the `Select' button on the front of the Connect420. Automatically switch between HDMI sources When one of the HDMI sources is used, the Connect420 will automatically switch to the appropriate input channel. If numerous HDMI sources are already in use, the Connect420 will automatically switch to the most recently active HDMI source. note: Automatic switching must be supported by the HDMI source. Manual switching between HDMI sources The `Select' button on the front of the Connect420 can be used to manually switch between the various HDMI sources. or use the remote control to manually select an HDMI source. The LED lights on the front of the panel indicate which source is active. No (or poor) image and sound If you experience poor or no image after connecting the HDMI switcher, try to recover the problem by connecting the devices one at the time to your screen (TV, monitor or projector). This way you can determine whether the problem lies with the HDMI sources, the HDMI cables, the HDMI switcher or the screen. HDMI devices which are not tested and certified by ATC (Authorized Test Centers) can cause image and sound problems. Check if the power adaptor of the Connect420 is connected and plugged into the mains. Only use High Speed HDMI® certified cables for the best picture and sound quality. Do not use HDMI cables that are longer than specified in the technical data. Both the HDMI source and your screen have to support HDMI fully. Check whether your HDMI sources, DVI device and screen support the copy protection HDCP (High-bandwidth Digital Content Protection). [. . . ] Environmental Information for Customers in the European Union European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. [. . . ]