User manual MARMITEK GIGAVIDEO 570

[. . . ] To your (second) TV without running wires. It enables you to connect 2 sources simultaneously and simply switch between both signals without changing plugs. With the GigaVideo570TM you can also transmit films from your PC to the TV in the living room or bedroom, transmit MP3 audio to your Hifi system and monitor your baby or patients by using your video camera, all from a remote location. The built-in infra-red extension feature enables you to control your A/V devices with your own remote remote control and control the two connected sources from the room where you watch TV! [. . . ] Make sure your A/V equipment is switched on. When the receiver on your TV is connected with RCA plugs and/or a SCART adapter: Switch the TV, to which you have connected the receiver, over to the TV channel, which belongs to the A/V input, on which you have connected the receiver. in case of most appliances , you do that by pressing the 0 or A/V button. The TV will never have to look for channels for the connection via `A/V IN'. When the receiver on your TV is connected to the RF output: Switch the TV, to which you have connected the receiver, over to TV channel 36. The wireless GigaVideo570TM usually works best with the flat faces of the antennas [K] on the Transmitter and Receiver unit look at one another. Sometimes however distance, reflections and other effects in the home may affect the signal so that some adjustment of either Transmitter or Receiver antenna may be necessary to get the best signal. if still experiencing difficulty , try changing the "ABCD" channel selector [A] and change channels. Remember though both the receiver and transmitter must be on the same channel. The maximum distance between transmitter and receiver depends on local circumstances, but on average the distance is up to 30m, through walls and floors. If you experience signal problems please read chapter 9: Frequently Asked Questions. The connection can usually be found on the graphics card. the signal needs to be a so-called `composite video signal'. Connecting to a PC can be done with RCA/RCA on A/V1b as well as RCA/mini-DIN on A/V2. The connector of your graphics card can look as follows (see figure 5): · Yellow RCA connector (RCA Yellow) If your PC is fitted with this connector, the yellow plug of the RCA cable included can be directly connected to the yellow RCA connector of your transmitter. Place the receiver in an easy accessible spot with enough space around it, e. DIN-plug (S-VIDEO) If your graphics card is fitted with the S-VIDEO-connector you cannot directly connect the transmitter to your PC but need an adapter. This adapter `converts' your S-VIDEOsignal into a composite video signal. This adapter is usually supplied with the graphics card (or PC) with TV-out. You can also get this adapter from your Marmitek dealer. White RCA yellow This standard adapter does not fit on all PCs. in that case , please contact the supplier of the graphics card. [. . . ] Environmental Information for Customers in the European Union European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. [. . . ]