User manual MARSHALL HANDWIRED CABINETS

[. . . ] Features such as heavy duty wiring, metal grab handles (2061CX, 1960HW) and specially designed Celestion loudspeakers, set these cabinets apart in terms of tone and build quality. Our cabinet construction techniques have changed very little since the Guv'nor, Jim Marshall, hand-built his very first cabinet back in 1962. [. . . ] No objects filled with liquids should be placed on the apparatus. Do not attempt to remove or re-wire the internal speakers or any other components within the speaker cabinet. refer all servicing to qualified personnel. Servicing is required when the speaker cabinet has been damaged in any way, such as liquid being spilled or objects falling into it, the speaker cabinet being exposed to rain or moisture, the speaker cabinet not operating normally or being dropped or damaged in any way. Ensure all associated equipment is switched off and unplugged from the mains before connecting or disconnecting the speaker cabinet. Always plug the speaker lead into the speaker cabinet before plugging it into the amplifier. Ensure any associated equipment is switched off and unplugged from the mains in the event of lightning storms or if unused for long periods of time. Always ensure that the supplied speaker lead is used to connect the speaker cabinet to associated equipment. Protect the speaker lead from being walked on, pinched or having heavy objects rolled over it. Ensure the speaker lead is not entangled with any other lead. If a replacement speaker lead is required please contact your authorised Marshall Dealer. always move or transport speaker cabinets individually. [. . . ] Note: This equipment has been tested and found to comply with the requirements of the EMC directive (Environments E1, E2 and E3 EN 55103-1). Caution: Any changes or modifications not expressly approved by Marshall Amplification plc may void the users authority to operate the equipment. [. . . ]