User manual MARTIN AUDIO EM250

[. . . ] 16 Coffee and espresso prepared from ground coffee . 24 Coffee jug (dispensing several servings, one directly after another) . 28 Lighting: Setting the switch-off time. 70 3 IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances basic safety precautions should always be followed, including the following: Read all instructions before installation or use of the coffee system. Proper use Please read these instructions carefully to prevent accidents and machine damage. [. . . ] The programmed volume of water or milk will now be dispensed each time that particular drink is selected. Once the maximum water or milk volume is reached, the appliance automatically stops the water supply. The maximum fill amount for each beverage is then stored. If the water tank or milk container becomes empty during portion programming, the process is canceled and the size is not stored. 34 Setting the serving sizes Setting serving sizes for cappuccino and latte macchiato using OK ^ Place the cappuccino cup or latte macchiato glass you will be using to set the portion size under the main dispensers. ^ Press and hold OK until the display shows the options for Cappuccino (Milk froth, Espresso) or Latte Macchiato (Hot milk, Milk froth, Espresso). Latte Macchiato 8 Hot milk 8 Milk froth The appliance now begins preparing a cappuccino or latte macchiato. As soon as the component (which you have checked) is being dispensed, the display will read "Program the amount". ^ Once the cup is full to your liking with that component and "Save" appears in the display, tap OK to save the amount. ^ Repeat this process for the other components you have chosen for this type of coffee. Each time the drink is prepared it will contain the programmed amount of coffee, milk, etc. ^ Use < or > to reach the option you wish to program to a certain serving size. ^ Tap OK to place a check mark next to the desired component to show that you would like to program this component. ^ Repeat this process until all components you wish to program the serving size for are marked with a check. Saving an entry ^ Once you have completed an entry, use < or > to select "OK", confirm with OK. The display will briefly show the User profile welcome screen, followed by the main menu. Canceling an entry ^ If you do not wish to save an entry you have made, use < or > to select "back A", confirm with OK. Changing a user profile ^ Select "Change user profile", confirm with OK. ^ Select the user profile you wish to change, confirm with OK. Continue as you would for "Creating a user profile". 38 User profiles Deleting a user profile ^ Select "Delete user profile", confirm with OK. ^ Use < or > to select the user profile you wish to delete, confirm with OK. A check mark appears after the user profile, and it will be erased shortly. Revert The appliance can be set so that it automatically reverts to the standard user profile or continues to use the most recently selected user profile set. ^ Use < or > to select "Revert". You can now choose between: Manually The appliance retains the selected user profile until another profile is selected. ^ Use < or > to select "Manually", confirm with OK. After dispensing After each drink prepared, the appliance automatically reverts back to the standard user profile. [. . . ] Installation, repairs and other work by unqualified persons could be dangerous. Verify that the voltage, load and circuit rating information found on the data plate match the household electrical supply before installing the coffee system. Do not connect the appliance to a power inverter or directly to power produced outside of the normal electrical grid (i. e. Direct connection to such power sources can cause power surges and tripped breakers when the appliance is turned on, and could damage the appliance. [. . . ]