Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MARTIN AUDIO M1. We hope that this MARTIN AUDIO M1 user guide will be useful to you.
Lastmanuals help download the user guide MARTIN AUDIO M1.
Detailed instructions for use are in the User's Guide.
[. . . ] It is suggested that you retain the original packaging so that the unit can be repacked at a future date if necessary. Please note that Martin Audio and its distributors cannot accept responsibility for damage to any returned product through the use of nonapproved packaging.
2 Martin Audio M1 and ICT300
ENGLISH
CONTENTS
<
3
>
PRINT
GUIDES
MAINS CONNECTION
The M1 is supplied with a captive mains lead with an integral U. K. [. . . ] Be aware that speakers producing very high power levels can move or creep. To avoid this, place friction material between the floor and speaker and between each speaker. 4. 3 Rigging and suspension WARNING: Suspending the system should only be done by qualified personnel following safe rigging practices. Secure fixings to the building structure are vital. Seek help from architects, structural engineers or other specialists if in any doubt.
4 Martin Audio M1 and ICT300
ENGLISH
CONTENTS
<
5
>
PRINT
GUIDES
M1 CONNECTIONS
The M1 should be connected immediately preceding the power amplifier(s) and after any such devices as preamps, mixing desks or other equalisers. Input connections, which are balanced, are via combination XLR type sockets and TRS (tip/ring/sleeve) "stereo" jack sockets, wired as follows: Pin 1 / jack sleeve Pin 2 / jack tip Pin 3 / jack ring = = = Signal 0V Signal +(hot) Signal -(cold)
If driving the M1 from an unbalanced source, mono jack plugs may be used. Under some conditions, this may result in a hum loop. If so, alternative connections, via an XLR type plug or a TRS jack should be used, wired as follows. Pin 1 / jack sleeve Pin 2 / jack tip Pin 3 / jack ring = = = Not connected Cable inner (signal) Cable screen (ground)
M1 outputs are pseudo balanced on stereo jack sockets. Pin 1 / jack sleeve Pin 2 / jack tip Pin 3 / jack ring = = = Signal 0V Signal + (hot) Signal - (cold)
6
M1 OPERATION
The M1 is a 2-channel system controller which is recommended for use with the Martin Audio ICT300 compact loudspeaker system used either fullrange or with additional sub-bass. When using an ICT300 on its own, set the mode switch on the rear of the M1 to full-range. If additional bass enclosures are used, set the mode switch to sub-bass and drive the bass amplifiers from the sub-bass output jack. [. . . ] Martin Audio is not liable for consequential damages. This warranty is exclusive and no other warranty is expressed or implied. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MARTIN AUDIO M1
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MARTIN AUDIO M1 will begin.
