User manual MAXDATA PRO 5500 IR 1.1

[. . . ] MAXDATA Notebook PRO 5500 IR User's Manual P5500IRUK1. 1 Contents Note Information on the return of electrical and electronic waste in EU countries. . . . . . . . . . . . . . . . . . . . 8 5 Important Safety Information Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Additional safety notes for units with wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 CE-labelling for units with wireless LAN and Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Now press the on/off button to switch on the notebook. Tip: If you experience a program or system crash, press the keys: Ctrl + Alt + Del at the same time. If you're fortunate this will enable you to end only the task that has crashed and/or restart the computer (warm start). If this does not work, hold down the on/off button for more than four seconds ­ this will switch off the computer. You can now start up the computer as normal (cold start). Once the computer is switched on, the on/off button can perform several functions depending on the energy settings. In the standard setting, pressing the on/off button again will switch off the computer. Fig. 5 Please note that with Microsoft® Windows® operating systems you should always switch off the computer as follows: Click the Start button. This avoids any problems with the hard disk and operating system. The operating system is installed the first time you switch on the computer. Please follow the operating system's installation instructions here. After installation and restarting, the computer is ready to use. The basic graphics functions allow you to modify the resolution, the color depth and the desktop appearance. You can find more detailed information on this point in the installation instructions. Preparation Power Management Your system is compatible with the ACPI power saving system. The basic power management settings can be found under the following in Windows operating systems: <Settings> <Power Options>. If you have questions, use the Windows Help function. Here you can set the behavior separately for various battery charge levels. Standby: ­ low energy consumption ­ The display is dimmed and the hard disk remains unchanged. By pressing the on/off button, the computer returns to the normal operating state. Sleep: ­ Without power adapter no energy consumption ­ The current operating state is saved to the hard disk; the computer is switched off. All open documents or applications become available again when the computer is switched on. Switching off the notebook and disconnecting it from the power supply (pulling the plug of the power adapter) can prevent any energy consumption. · Notes on the ExpressCard: Never remove an ExpressCard when the system is in sleep mode. [. . . ] Possible cause of the problem: · An energy saving function has been activated. Note: · The screen switches itself off. Troubleshooting: · Press any key, or press the on/off button if none of the status LEDs are lit. Possible cause of the problem: · A software error has caused a system crash. [. . . ]