User manual MAXENT MX-26X3

[. . . ] LCD Flat Panel 26"/32 LCD Monitor Owners Manual Important Safety Instructions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove the front or back covers. Refer servicing to qualified service personnel only. The lightning flash with arrow-head within a triangle is intended to inform the user that parts inside the product are a risk of electric shock. The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are explained. Special Notices Certain programs may be copyrighted and any unauthorized recording in whole or in part may be in violation of copyright laws in the U. S. FCC/CSA regulations state that any unauthorized modifications to this display may void user authority to operate it. Warnings & Precautions To prevent damage which may result in fire or shock hazard, do not expose this product to rain or moisture. [. . . ] Connect the red (R) and white (L) audio jacks from the DVD to the R and L audio-in jacks located next to the PR/CR connector. - 15 Display Connections Connecting a DVD (con't) Using S-Video Input Connect the S-Video (4-pin DIN) connector from the DVD to the S-Video input on the back of monitor. Connect the red (R) and white (L) audio jacks from the DVD to the (R) and (L) audio-in jacks located next to the S-Video connector. Note: There are two sets of S-Video inputs provided. DVD PLAYER Using Composite Input Connect the yellow (video) out connector from the DVD to the yellow video input on the back of monitor. Connect the red (R) and white (L) audio-out jacks from the DVD to the R and L audio-in jacks located next to the yellow Video connector. Note: There are two sets of composite inputs provided. DVD PLAYER 16 Display Connections Connecting a Set-Top Box Using Component Video Input There are two sets of component video inputs provided. You can use either set of component inputs to connect your STB. Some HDTV Set top boxes may not have a Component Video output. Connect the green-colored (labeled as Y) jack from the STB to the green-colored jack of the monitor. Connect the red-colored (labed as Pr or Cr) jack from the STB to the red-colored Pr1/Cr1 jack of the monitor. Connect the blue-colored (labed as Pb or Cb) jack from the STB to the blue-colored Pb1/Cb1 jack of the monitor. Connect the red (R) and white (L) audio jacks from the STB to the R and L audio-in jacks located next to the Pr/Cr1 connector. HDTE SET-TOP BOX Using RGB Input Connect the 15-pin D-Sub RGB connector from the back of the HDTV set top box to the RGBIN Connector located on the back of the monitor. Connect the red (R) and white (L) audio-out jacks from the HDTV set top box to the R and L audio-in jacks located next to the RGB connector. - Notes: Some HDTV Set top boxes may not have a RGB output. Use Component Video input or DVI input method if this is the case. Upon connecting your HDTV set top box to the RGB input of the monitor, it may be necessary to adjust various picture settings on the monitor to correctly match the output of the HDTV set top box. This is caused by the different video timings set by various HDTV set top box manufacturers. (See Page 40 for more information). 17 Display Connections Connecting a Set-Top Box (con't) Using DVI Input Connect the DVI-D connector from the back of the HDTV set top box to the DVI-IN Connector located on the back of the monitor. Connect the red (R) and white (L) audio-out jacks from the HDTV set top box to the R and L audio-in jacks located next to the DVI-D connector. - Notes: Some HDTV Set top boxes may not have a DVI output. Use Component Video input or RGB input method if this is the case. Upon connecting your HDTV set top box to the DVI input of the monitor, it may be necessary to adjust various picture settings on the monitor to correctly match the output of the HDTV set top box. This is caused by the different video timings set by various HDTV set top box manufacturers. (See Page 68 for more information). External Audio Connections Connecting to an External Amplifiers This monitor can be connected to an external amplifier using the AUDIO OUT jacks located on the back of the monitor. Connect the red (R) and white (L) AUDIO OUT jacks from right side of the connector panel to the external amplifier. Note: The AUDIO OUT RCA jacks can be set to either Fixed or Variable audio output levels. (See Page 48 for more information) 18 Display Connections Connecting a Subwoofer This monitor is equipped with a subwoofer output for connecting to an external amplified subwoofer. Connect a RCA cable from the subwoofer's input to the subwoofer's output jack on the back of the monitor. [. . . ] Notes: H-Position, H-Size, V-Position and V-Size adjustments are only available in RGB, DVI, and Component input modes. 35 Picture Controls Picture-in-Picture Turning On PIP PIP and POP modes allow users to view two video input sources simultaneously. Press the key once on the remote control to engage in Picture-in-Picture mode. Pressing the key repeatedly will cycle thru the following modes: PIP Key When engaged in PIP mode, a small window is displayed in one of the four corners. The OSD on the upper right corner will denote the input selected for main picture (large screen) and the sub-picture (small screen) displayed. [. . . ]