User manual MAXENT MX-50X1

[. . . ] 50 IMPORTANT SAFETY INSTRUCTIONS WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove the front or back covers. Refer servicing to qualified service personnel only. The lightning flash with arrow-head within a triangle is intended to inform the user that parts inside the product are a risk of electric shock. The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are explained. WARNINGS & PRECAUTIONS To prevent damage which may result in fire or shock hazard, do not expose this product to rain or moisture. To prevent electric shock, do not remove cover. [. . . ] OSD Background You can set the OSD menu's background to transparent or with a blue background. Set to OFF if you want a transparent setting. Set to ON if you want a blue background. OSD Language You can set the OSD language to English, French or Spanish. Note: To prevent permanent after-image, we strongly suggest setting the "OSD TIMEOUT" to ON. 21 ADVANCED FUNCTIONS Sleep Timer Settings Setting Sleep Timer Using OSD To set the sleep timer using the OSD screen: 1. Press the MENU +/- keys on the remote or the front control panel. Use the ADJ +/- keys to navigate to "OTHER" OSD sub-menu as displayed below. Use the MENU +/- keys to navigate to SLEEP function. The display will function normally until the 1-minute mark. At the 1minute mark, the sleep timer will display a second by second countdown clock to notify you that the display is about to turn off. Sleep Timer On/Off To turn on sleep timer, switch to ON position. Timer Setting You can set the turn-off timer from 1 to 120 minutes. Use the ADJ +/- keys to set any number between 1 and 120. Power Off Warning SLEEP TIMER 0:59 Setting Sleep Timer Using Remote Control To set the sleep timer using the remote control: 1. Press the SLEEP TIMER key on the remote. This will display the sleep timer display on the upper right corner of screen. Pressing the SLEEP TIMER key again will cycle the sleep timer through all the preset times. When setting is complete, simply press the DISPLAY key to hide the sleep timer display. Your sleep timer is now running in the background. The display will function normally until the 1-minute mark. At the 1minute mark, the sleep timer will display a second by second countdown clock to notify you that the display is about to turn off. If you wish to turn the sleep timer OFF before it shuts itself off, simply press the SLEEP TIMER key again and cycle through all the preset times until "SLEEP: OFF" is displayed. Power Off Warning SLEEP TIMER 0:59 Sleep Timer Set SLEEP: OFF 22 ADVANCED FUNCTIONS TV Tuner Settings Accessing the TV Settings Menu If your display is equipped with the optional TV tuner module, available TV tuner settings can be displayed by: 1. Press the MENU +/- keys on the remote or the front control panel. Use the ADJ +/- keys to navigate to "TV" OSD sub-menu as displayed below. [. . . ] Switch MUTE off by using the MUTE button. This display is manufactured using an extremely high level of precision technology; however, sometimes some pixels of the display may not display. Please see the enclosed warranty card for more information. Do not allow a still image to be displayed for an extended period of time as this can cause a permanent after-image to remain on the display. Picture is distorted with abnormal patterns 1. [. . . ]