User manual MAXI-COSI AXISS

[. . . ] To maximize the guarantee, you can register your Maxi-Cosi Axiss at www. You will need the product number to register. This can be found on the sticker attached to the bottom of the frame. Congratulations on your purchase of the Maxi-Cosi Axiss. [. . . ] Car seats that are incorrectly secured can pose a danger to fellow passengers. To make placing the child into the car seat easier, use the handy belt hooks on the sides of the car seat (a). Before placing the child into the seat, fix the shoulder belts to the hooks. Place the child into the car seat, then remove the belts from the hooks. Slide the buckle sections (a) + (b) together and place them into the buckle until you hear a clear "click" sound. Pull on the adjustable belt and then pull the whole belt system tight. - Note: Do not leave more than one finger's width of space between the child and the belt system. - Note: The belts should be pulled extremely tight. Slack of just one finger's width will make it virtually impossible for the child to free his/her arms from underneath the shoulder belts. The belt system should be adjusted according to the height of the child. * The shoulder belts of the harness should be adjusted so that they are level with the child's shoulders (see diagram). Push the adjuster button (a) and simultaneously pull the shoulder belts (b) to loosen the belt system (make sure to pull the belts and not the belt pads). When the headrest is in the desired position, press it back to lock it into position. 28) Adjusting the car seat The Maxi-Cosi Axiss can be adjusted to 6 different positions from sitting to semi-reclining - Push the button on the front of the seat shell and simultaneously adjust the position of the seat backwards or forwards to the desired sitting/reclining position. Release the button to lock the seat shell into the desired position. Refer to the washing label before cleaning the fabric cover (the washing label is stitched to the cover). IMPORTANT: do NOT remove other parts from the car seat, such as the EPS/polystyrene or other foam material from underneath the fabric cover. These materials are necessary for the safety of the Maxi-Cosi Axiss. When re-attaching the cover, it is very important that the harness belts are not twisted. These should pass through the belt buckle flat (see diagram). The harness belts should be placed underneath the cross beams on the rear of the car seat. Before placing the child back into the car seat, you should check that the belt system is working correctly. [. . . ] We guarantee that this product was manufactured in accordance with the current European safety requirements and quality standards which are applicable to this product, and that this product is free from defects in workmanship and material at the time of purchase. during the production process the product was subjected to various quality checks. If this product, despite our efforts, shows a material/manufacturing fault within the warranty period of 24 months, (with normal use as described in the user instructions) we will comply with the warranty terms and conditions. In this case please contact your dealer. [. . . ]