User manual MAXTOR C474295

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MAXTOR C474295. We hope that this MAXTOR C474295 user guide will be useful to you.

Lastmanuals help download the user guide MAXTOR C474295.

Download

Manual abstract: user guide MAXTOR C474295

Detailed instructions for use are in the User's Guide.

 [. . . ] Application Note:
Hamamatsu C4742-95
Camera Descriptions
· · · ·

Interfacing non-standard cameras to Matrox Pulsar April 04,  1997

1280 (H) x 1024 (V).  [. . . ] The correct commands for this mode should be set to: n AMD N (Free run) n SHA F (1280 x 1024 mode) n SMD N (Normal read) n NMD N (Normal exposure)

Mode 2: Continuous mode (Binning)
·

· ·

Matrox Pulsar is SLAVE in this mode,  in other words the camera sends the RS-422 (10-bit) Video,  RS-422 HSYNC,  RS-422 VSYNC and RS-422 Pixel clock in continuous mode to the Matrox Pulsar. The camera's parameters are set using the C4742-95 controller software. The correct commands for this mode should be set to: n AMD N (Free run) n SHA F (1280 x 1024 mode) n SMD S (Binning read) n NMD N (Normal exposure)

Cabling Requirements

Mode 1: Continuous mode (Full resolution)
·

·

PULSAR/DIG/MOD board required for digital data,  syncs and control signals in RS-422 format. The connections between the PULSAR/DIG/MOD and the 68-pin connector of the camera are as follows:
PULSAR/DIG/MOD (PLS/CBL/OPEN connector) Pin name Pin no CLOCK,  INPUT,  63 CLOCK,  INPUT,  + 29 HSYNC,  INPUT,  60 HSYNC,  INPUT,  + 26 VSYNC,  INPUT,  59 VSYNC,  INPUT,  + 25 DATA,  INPUT,  0 54 DATA,  INPUT,  0 + 20 (Pin-out continued) Hamamatsu C4742-95 (68-pin connector) Pin name PIXCLK PIXCLK + HVALID HVALID + VVALID VVALID + DB0 DB0 +

Pin no. 1 35 2 36 3 37 4 38

PUL-CID-038

2

Application Note:

Interfacing non-standard cameras to Matrox Pulsar Hamamatsu C4742-95
Cabling Requirements (continued)
DATA,  INPUT,  1 DATA,  INPUT,  1 + DATA,  INPUT,  2 DATA,  INPUT,  2 + DATA,  INPUT,  3DATA,  INPUT,  3 + DATA,  INPUT,  4 DATA,  INPUT,  4 + DATA,  INPUT,  5DATA,  INPUT,  5 + DATA,  INPUT,  6DATA,  INPUT,  6 + DATA,  INPUT,  7DATA,  INPUT,  7 + DATA,  INPUT,  8DATA,  INPUT,  8 + DATA,  INPUT,  9DATA,  INPUT,  9 + USER,  INPUT,  0 USER,  INPUT,  0 + 53 19 50 16 49 15 48 14 47 13 45 11 44 10 43 9 42 8 56 22                     DB1 DB1 + DB2 DB2 + DB3 DB3 + DB4 DB4 + DB5 DB5 + DB6 DB6 + DB7 DB7 + DB8 DB8 + DB9 DB9 + A/D OVF A/D OVF +

April 04,  1997
5 39 6 40 7 41 8 42 9 43 10 44 11 45 12 46 13 47 20 54

Mode 2: Continuous mode (Binning) All connections are the same as in Mode 1 : Continuous mode (Full resolution)

The DCF(s) mentioned in this application note can be found on the MIL and MIL-Lite CD,  or our FTP site (ftp. matrox. com). The information furnished by Matrox Electronics System,  Ltd. is believed to be accurate and reliable. Please verify all interface connections with camera documentation or manual.  [. . . ] Tel: 852. 2877. 5387 Fax: 852. 2537. 9530

PUL-CID-038

3 [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAXTOR C474295

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MAXTOR C474295 will begin.