User manual MAXTOR CHEETAH 15K.6 SAS REV B 9-2008

[. . . ] Product Manual Cheetah 15K. 6 SAS ST3450856SS ST3300656SS ST3146356SS ST3450056SS (FDE) ST3300056SS (FDE) ST3146756SS (FDE) 100466193 Rev. B September 2008 ©2008, Seagate Technology LLC All rights reserved. B September 2008 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Cheetah, SeaTools and SeaTDD are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/ or other countries. [. . . ] This specification assumes that the drive is packaged in the shipping container designed by Seagate for use with drive. HDA Temp. Check Point 1. 0 " . 5" Figure 10. Location of the HDA temperature check point 36 Cheetah 15K. 6 SAS Product Manual, Rev. B 6. 4. 2 Relative humidity The values below assume that no condensation on the drive occurs. Operating 5% to 95% non-condensing relative humidity with a maximum gradient of 20% per hour. Non-operating 5% to 95% non-condensing relative humidity. 6. 4. 3 Effective altitude (sea level) a. Operating ­1, 000 to +10, 000 feet (­305 to +3, 048 meters) b. Non-operating ­1, 000 to +40, 000 feet (­305 to +12, 210 meters) 6. 4. 4 Shock and vibration Shock and vibration limits specified in this document are measured directly on the drive chassis. If the drive is installed in an enclosure to which the stated shock and/or vibration criteria is applied, resonances may occur internally to the enclosure resulting in drive movement in excess of the stated limits. If this situation is apparent, it may be necessary to modify the enclosure to minimize drive movement. The limits of shock and vibration defined within this document are specified with the drive mounted by any of the four methods shown in Figure 11, and in accordance with the restrictions of Section 8. 3. Operating--normal The drive, as installed for normal operation, shall operate error free while subjected to intermittent shock not exceeding: · 15 Gs at a duration of 11 msec (half sinewave) · 25 Gs at a duration of 2 msec (half sinewave) · 60 Gs at a duration of 2 msec (half sinewave) when performing reads only Shock may be applied in the X, Y, or Z axis. Shock is not to be repeated more than once every 2 seconds. Operating--abnormal Equipment, as installed for normal operation, does not incur physical damage while subjected to intermittent shock not exceeding 40 Gs at a duration of 11 msec (half sinewave). Shock occurring at abnormal levels may promote degraded operational performance during the abnormal shock period. Specified operational performance will continue when normal operating shock levels resume. Shock may be applied in the X, Y, or Z axis. Shock is not to be repeated more than once every 2 seconds. Non-operating The limits of non-operating shock shall apply to all conditions of handling and transportation. This includes both isolated drives and integrated drives. The drive subjected to nonrepetitive shock not exceeding the three values below, shall not exhibit device damage or performance degradation. · 80 Gs at a duration of 11 msec (half sinewave) · 300 Gs at a duration of 2 msec (half sinewave) · 150 Gs at a duration of 0. 5 msec (half sinewave) Shock may be applied in the X, Y, or Z axis. Cheetah 15K. 6 SAS Product Manual, Rev. [. . . ] Worldwide support is available 24 hours daily by email for your questions. Presales Support: Presales@Seagate. com Technical Support: DiscSupport@Seagate. com Warranty Support: http://www. seagate. com/support/service/index. html mySeagate my. seagate. com is the industry's first Web portal designed specifically for OEMs and distributors. It provides self-service access to critical applications, personalized content and the tools that allow our partners to manage their Seagate account functions. Submit pricing requests, orders and returns through a single, password-protected Web interface-anytime, anywhere in the world. [. . . ]