User manual MAXTOR DVC10

[. . . ] Application Note: DVC-10 Camera Interface Overview · · · · · · Interfacing non-standard cameras to Matrox Pulsar May 9, 1997 755 x 484 x 10-bit or 8-bit @30 fps (max. ) Digital video output (RS-422) Interlaced Internal hsync, vsync, and pixel clock signals (all RS-422) supplied externally 14. 318 MHz pixel clock rate 2 modes of operation: Continuous and triggered (asynchronous reset) Camera Interface Details Mode 1: Continuous mode Video LVAL FVAL PIXEL CLOCK DVC-10 Matrox Pulsar (with PULSAR/DIG/MOD) · · · · · · · 752 x 480 x 10-bit or 8-bit @30 fps (max. ) Digital video output (RS-422) Interlaced Continuous video Matrox Pulsar receiving RS-422 hsync (Line Valid or LVAL), vsync (Frame Valid or FVAL) and pixel clock signals from camera DCF used for 10-bit: DVC10_D. DCF DCF used for 8-bit: DVC8_D. DCF Mode 2: Trigger mode (asynchronous reset) Video LVAL DVC-10 FVAL EXPOSURE PIXEL CLOCK Matrox Pulsar (with PULSAR/DIG/MOD) TTL external trigger · · · · · · · 752 x 240 x 10-bit Digital video output (RS-422) Non-interlaced Matrox Pulsar receiving RS-422/TTL external trigger signal Matrox Pulsar receiving RS-422 hsync (Line Valid or LVAL), vsync (Frame Valid or FVAL) and pixel clock signals from camera Matrox Pulsar sending exposure signal to camera DCF used: DVC_10i. DCF Application Note: DVC-10 Cabling Requirements Interfacing non-standard cameras to Matrox Pulsar May 9, 1997 Mode 1:Continuous mode · PULSAR/DIG/MOD required for digital data in RS-422 format. The following connections should be made between the 37-pin DB-37 connector of the camera and the 68-pin connector of PULSAR/DIG/MOD: PULSAR/DIG/MOD (68-pin connector) Pin name CLKIN+ CLKIN HSYNC+ HSYNCVSYNC+ VSYNCGROUND GROUND DATA9+ DATA9DATA8+ DATA8DATA7+ DATA7DATA6+ DATA6DATA5+ DATA5DATA4+ DATA4DATA3+ DATA3DATA2+ DATA2DATA1+ DATA1DATA0+(LSB) DATA0- (LSB) GROUND TTL_EXP1 TTL_USER0 TTL_USER1 TTL_USER2 DVC-10/DVC-08 Pin no. 29 63 26 60 25 59 01 68 08 42 09 43 10 44 11 45 13 47 14 48 15 49 16 50 19 53 20 54 12 66 31 32 33 (DB-37 plug) Pin name CLK+ CLKHSYNC+ HSYNCVSYNC+ VSYNCGND GND DB9+ DB9DB8+ DB8DB7+ DB7DB6+ DB6DB5+ DB5DB4+ DB4DB3+ DB3DB2+ DB2DB1+ DB1DB0+ DB0GND RESET MODE CONTROL0 MODE CONTROL1 MODE CONTROL2 Pin no. 01 20 02 21 03 22 16 35 15 34 14 33 13 32 12 31 11 30 10 29 09 28 08 27 07 26 06 25 16 17 18 37 19 PUL-CID-031 2 Application Note: DVC-10 Interfacing non-standard cameras to Matrox Pulsar May 9, 1997 Mode 2:Trigger mode (asynchronous reset) · · · · IMG-7W2-TO-5BNC cable required for TTL external trigger source and PULSAR/DIG/MOD required for digital data, syncs and control signals in RS-422 format. [. . . ] is believed to be accurate and reliable. Please verify all interface connections with camera documentation or manual. Contact your local sales representative or Matrox Sales office or Matrox Imaging Applications at 514-822-6061 for assistance. Corporate Headquarters: Canada and U. S. A. Dorval, Quebec, Canada H9P 2T4 Tel: (514) 685-7230 Fax: (514) 822-6273 Sales Offices: U. K. Sefton Park, Stoke Poges Buckinghamshire U. K. SL2 4JS Tel: +44 (0) 1753 665500 Fax: +44 (0) 1753 665599 France Matrox France SARL 2, rue de la Couture, Silic 225 94528 Rungis Cedex Tel: (0) 1 45-60-62-00 Fax: (0) 1 45-60-62-05 Germany Matrox GmbH Inselkammerstr. 8 D-82008 Unterhaching Germany Tel: 089/614 4740 Fax: 089/614 9743 Asia Pacific Matrox Asia Liaison Office Rm. [. . . ] Tel: 852. 2877. 5387 Fax: 852. 2537. 9530 PUL-CID-031 3 [. . . ]