Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MAXTOR HARDCARD EL. We hope that this MAXTOR HARDCARD EL user guide will be useful to you.
Lastmanuals help download the user guide MAXTOR HARDCARD EL.
Manual abstract: user guide MAXTOR HARDCARD ELJUMPERS
Detailed instructions for use are in the User's Guide.
[. . . ] HardCard EL
ATA Jumper Settings
Product Name: Hardcard IIXL Serial Number Codes: CDC and CDE Formatted Capacity: 52 XL 52, 311, 040 105XL 105, 231, 360 Average Access Time: 17ms Interface: ST506; BIOS driven as IDE Driver Needed: ATDOSXL. SYS Must be installed in CONFIG. SYS as:
DEVICE=ATDOSXL. SYS
In order for the hardcard to work in a given system, the user must assign a unique IRQ and a BIOS address. [. . . ] IRQ
1 of 1
HardCard EL
ATA Jumper Settings
IRQ 11 12 14 SW5 ON* OFF OFF SW6 OFF* ON OFF SW7 OFF* OFF ON SW8 OFF* OFF OFF
*These are default settings ADDRESS SELECTION SW1 ON* ON ON ON ON ON ON ON SW2 ON* ON ON ON OFF OFF OFF OFF SW3 ON* ON OFF OFF ON ON OFF OFF SW4 ON* OFF ON OFF ON OFF ON OFF BIOS ADDRESS C8000-C9FFF* CA000-CBFFF CC000-CDFFF CE000-CFFFF D0000-D1FFF D2000-D3FFF D4000-D5FFF D6000-D7FFF I/O ADDRESS 170-177, 376-377 320-327, 32E-32F 170-177, 376-377 320-327, 32E-32F 170-177, 376-377 320-327, 32E-32F 170-177, 376-377 320-327, 32E-32F DRIVE SELECT 0 0 1 1 0 0 1 1
*These are default settings.
2 of 2
HardCard EZ
ATA Jumper Settings
Product Name: Hardcard IIEZ Serial Number Codes: GDF, GDG, GDH and GDJ Formatted Capacity: HC EZ42 42MB HC EZ85 85MB HC EZ127 127MB HC EZ170 170MB HC EZ240 240MB Average Access Time: From 19ms to 16ms. Interface: ST506; BIOS driven as IDE Driver Needed: ATDOSHC. SYS Must be installed in CONFIG. SYS as: DEVICE=ATDOSHC. SYS In order for the hardcard to work in a given system, the user must assign a unique IRQ and a BIOS address. The default for this card is IRQ 11, BIOS address C8000-C9FFF. Due to a bus timing issue, the hardcards are unable to work in most Pentium and DX4 systems. Though they will work under Windows 95, they do so in `DOS Compatibility mode'. No enhanced mode driver exists at this time and there are no plans to produce one.
1 of 1
HardCard EZ
ATA Jumper Settings
IRQ IRQ 10 11 12 14 SW5 ON OFF* OFF OFF SW6 OFF ON* OFF OFF SW7 OFF OFF* ON OFF SW8 OFF OFF* OFF ON
*These are default settings ADDRESS SELECTION SW1 ON* ON ON ON ON ON ON ON SW2 ON* ON ON ON OFF OFF OFF OFF SW3 ON* ON OFF OFF ON ON OFF OFF SW4 ON* OFF ON OFF ON OFF ON OFF BIOS ADDRESS C8000-C9FFF* CA000-CBFFF CC000-CDFFF CE000-CFFFF D0000-D1FFF D2000-D3FFF D4000-D5FFF D6000-D7FFF I/O ADDRESS 170-177, 376-377 320-327, 32E-32F 170-177, 376-377 320-327, 32E-32F 170-177, 376-377 320-327, 32E-32F 170-177, 376-377 320-327, 32E-32F DRIVE SELECT 0 0 1 1 0 0 1 1
*These are default settings.
2 of 2
HardCard II
ATA Jumper Settings
Product Name: Hardcard II Serial Number Codes: CDA and CDB Formatted Capacity: HCII-40 40, 256, 000 HCII-80 80, 512, 000 Average Access Time: 25ms Interface: ST506; BIOS driven as IDE Driver Needed: ATDOSHC2. SYS Must be installed in CONFIG. SYS as: DEVICE=ATDOSHC2. SYS In order for the hardcard to work in a given system, the user must assign a unique IRQ and a BIOS address. The default for this card is IRQ 11, BIOS address C8000-C9FFF. Due to a bus timing issue, the hardcards are unable to work in most Pentium and DX4 systems. [. . . ] ADDRESS SELECTION SW1 ON* ON ON ON OFF OFF OFF OFF SW2 ON* ON OFF OFF ON ON OFF OFF SW3 ON* OFF ON OFF ON OFF ON OFF BIOS ADDRESS C8000-C9FFF* CA000-CBFFF CC000-CDFFF CE000-CFFFF D0000-D1FFF D2000-D3FFF D4000-D5FFF D6000-D7FFF I/O ADDRESS 170, 177, 376-377* 320-327, 32E-32F 170-177, 376-377 320-327, 32E-32F 170-177, 376-377 320-327, 32E-32F 170-177, 376-377 320-327, 32E-32F DRIVE SELECT 0* 0 1 1 0 0 1 1
*These are default settings.
2 of 2 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MAXTOR HARDCARD EL
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MAXTOR HARDCARD EL will begin.
