User manual MAXTOR LYRION SERIES IDE REV B 5-2007

[. . . ] Product Manual Lyrion Series IDE ST760211DE ST730212DE 100462437 Rev. B May 2007 Revision history Revision Date Sheets affected or comments Rev. B 01/04/07 05/01/07 Initial Release. Front cover, 1, 3-4, 9-11, 21-22, 26 and 28-31. Copyright © 2007 Seagate Technology LLC. [. . . ] B 13 2. 9 Acoustics Drive acoustics are measured as overall A-weighted acoustic sound power levels (no pure tones). Discrete tone penalties are added to the A-weighted sound power (LW) with the following formula only when determining compliance: LWt(spec) == LW + 0. 1Pt + 0. 3 < 4. 0 (Bels) where LW = A-weighted sound power level pt == Value of discrete tone penalty [==dLt-6. 0 (dBA)] dLt = Tone-to-noise ratio taken in accordance with ISO 7779 at each octave band. All measurements are consistent with ISO document 7779. Sound power measurements are taken under essentially free-field conditions over a reflecting plane. For all tests, the drive is oriented with the cover facing upward. ) Table 6: Drive level acoustics Acoustic mode Idle 1. 6 bels (typ) Operational 2. 2 bels (typ) 2. 10 Electromagnetic immunity When properly installed in a representative host system, the drive operates without errors or degradation in performance when subjected to the radio frequency (RF) environments defined in the following table: Table 7: Test Electromagnetic immunity Description 80 to 1, 000 MHz, 3 V/m, 80% AM with 1 kHz sine 900 MHz, 3 V/m, 50% pulse modulation @ 200 Hz ± 1 kV on AC mains, ± 0. 5 kV on external I/O ± 1 kV differential, ± 2 kV common, AC mains 150 kHz to 80 MHz, 3 Vrms, 80% AM with 1 kHz sine 0% open, 5 seconds 0% short, 5 seconds 40%, 0. 10 seconds 70%, 0. 01 seconds Performance level A Reference standard EN 61000-4-3: 96 ENV 50204: 95 Radiated RF immunity Electrical fast transient Surge immunity Conducted RF immunity Voltage dips, interrupts B B A C C C B EN 61000-4-4: 95 EN 61000-4-5: 95 EN 61000-4-6: 97 EN 61000-4-11: 94 2. 11 Reliability Specification 1 per 1014 bits read, max. 20, 000 power loss Measurement type Nonrecoverable read errors Load/Unload (LUL) cycles 14 Lyrion Series IDE Product Manual, Rev. B 2. 12 2. 12. 1 Agency certification Safety certification The drives are recognized in accordance with UL60950-1, CAN/CSA-C22. 2 No. 60950-1, EN60950 and IEC 60950. 2. 12. 2 Electromagnetic compatibility Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Electromagnetic Compatibility Directive (89/336/EEC). Testing is performed to the levels specified by the product standards for Information Technology Equipment (ITE). Emission levels are defined by EN 55022, Class B and the immunity levels are defined by EN 55024. Seagate uses an independent laboratory to confirm compliance with the EC directives specified in the previous paragraph. Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the directives when used in the test systems, we cannot guarantee that all systems will comply with the directives. The drive is designed for operation inside a properly designed enclosure, with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators should confirm EMC compliance and provide CE marking for their products. Korean RRL If these drives have the Korea Ministry of Information and Communication (MIC) logo, they comply with paragraph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Radio Research Laboratory (RRL) Ministry of Information and Communication Republic of Korea. These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic Susceptibility (EMI/EMS) for Class B products. Drives are tested in a representative, end-user system by a Korean-recognized lab. · Family name: · Certificate numbers: Lyrion Series STX-S181 (B) Australian C-Tick (N176) If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZS3548 1995 and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communication Authority (ACA). 2. 12. 3 European Union Restriction of Hazardous Substances (RoHS) Directive Seagate designs its products to meet environmental protection requirements worldwide, including regulations restricting certain chemical substances. A new law, the European Union Restriction of Hazardous Substances (RoHS) Directive, restricts the presence of chemical substances, including Lead, Cadmium, Mercury, Hexavalent Chromium, PBB and PBDE, in electronic products, effective July 2006. This drive is manufactured with components and materials that comply with the RoHS Directive. Lyrion Series IDE Product Manual, Rev. B 15 2. 12. 4 China Restriction of Hazardous Substances (RoHS) Directive 2. 12. 4 This product has an Environmental Protection Use Period (EPUP) of 20 years. The following table contains information mandated by China's "Marking Requirements for Control of Pollution Caused by Electronic Information Products" Standard. "O" indicates the hazardous and toxic substance content of the part (at the homogenous material level) is lower than the threshold defined by the China RoHS MCV Standard. "O"RoHS MCV "X" indicates the hazardous and toxic substance content of the part (at the homogenous material level) is over the threshold defined by the China RoHS MCV Standard. "X "RoHS MCV 2. 12. 5 FCC verification These drives are intended to be contained solely within a personal computer or similar enclosure (not attached as an external device). As such, each drive is considered to be a subassembly even when it is individually marketed to the customer. [. . . ] B 31 32 Lyrion Series IDE Product Manual, Rev. B 5. 0 Internet Seagate Technology support services For information regarding Seagate products and services, visit www. seagate. com. Worldwide support is available 24 hours daily by email for your questions. Presales Support: Presales@Seagate. com Technical Support: DiscSupport@Seagate. com Warranty Support: http://www. seagate. com/support/service/index. html mySeagate my. seagate. com is the industry's first Web portal designed specifically for OEMs and distributors. It provides self-service access to critical applications, personalized content and the tools that allow our partners to manage their Seagate account functions. [. . . ]