Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MAXTOR M14I. We hope that this MAXTOR M14I user guide will be useful to you.
Lastmanuals help download the user guide MAXTOR M14I.
Detailed instructions for use are in the User's Guide.
[. . . ] CAMERA INTERFACE APPLICATION NOTE REDLAKE MASD (KODAK) 1. 4i JUNE 19, 2001
Basics about the camera
MATROX PULSAR
Camera Descriptions
§ § § § § § 1317 × 1035 × 8-bit @ 6. 9 fps (maximum). Single channel RS-422 digital video output. [. . . ] PIX DATA EXPOSE
Specifics about the interface modes
TTL EXTERNAL TRIGGER *Matrox Pulsar RS-422 digital data input board
Camera Interface Details
Mode 1: Pseudo-continuous
§ Frame Rate: Matrox Pulsar receives the continuous video from the camera at 6. 9 frames per second. § Exposure time: Exposure time is controlled by the Remote Panel software. Refer to the camera manual for more information. § Remote Panel software settings: Settings for this mode are as follows:
DEF on GAB -22 BKB 0 BKE 0 MDE PI EXE 15. 096 STP P TRM P TRS AIA TRE 1 RDM 1 TPD 255 TPW 5 DGN 2
Mode 2: Asynchronous Reset (Trigger)
§ Frame rate: The frame rate is determined by the frequency of the external trigger signal. § Exposure time: Exposure time is controlled by the Remote Panel software. Refer to the camera manual for more information. § Remote Panel software settings: Settings for this mode are as follows:
DEF on GAB -22 BKB 0 BKE 0 MDE TR EXE 15. 096 STP P TRM P TRS AIA TRE 1 RDM 1 TPD 255 TPW 5 DGN 2
Mode 2: Asynchronous Reset (Control)
§ Frame rate: The frame rate is determined by the frequency of the external trigger signal. § Exposure time: The width (rising to falling edge) of the EXPOSURE1 (EXPOSE) signal initiates and controls the exposure. The exposure time can be modified in the DCF using Matrox Intellicam or with the MIL MdigControl() function. Consult the manual for more information. § Remote Panel software settings: Settings for this mode are as follows:
DEF on GAB -22 BKB 0 BKE 0 MDE CD EXE 15. 096 STP P TRM P TRS AIA TRE 1 RDM 1 TPD 255 TPW 5 DGN 2
PUL-CID-046
2
CAMERA INTERFACE APPLICATION NOTE REDLAKE MASD (KODAK) 1. 4i JUNE 19, 2001
Cabling details for this interface mode
MATROX PULSAR
Cabling Requirements
Mode 1: Pseudo-continuous
§ Cable: DBHD68-TO-OPEN (open ended) cable required for video, synchronization and control signals. § Connection: Connections between the 68-pin connector of the camera and the 68-pin connectors of the Matrox Pulsar are as follows:
PULSAR/DIG/MOD (68-pin connector) Pin name Pin no. [. . . ] Contact your local sales representative or Matrox Sales office or Matrox Imaging Applications at 514-822-6061 for assistance.
Corporate headquarters:
Canada and U. S. A. Dorval, Quebec H9P 2T4 Canada Tel: (514) 685-2630 Fax: (514) 822-6273
PUL-CID-046 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MAXTOR M14I
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MAXTOR M14I will begin.
