User manual MAXTOR SAVVIO 10K.3 SAS REV D 8-2009

[. . . ] Product Manual Savvio 10K. 3 SAS ® Standard Models Self-Encrypting Drive Models ST9300603SS ST9146803SS ST9300503SS ST9146703SS 100516229 Rev. D August 2009 ©2008-2009, Seagate Technology LLC All rights reserved. D August 2009 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Savvio, SeaTools and SeaTDD are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. [. . . ] Parameters, other than spindle start, are measured after a 10-minute warm up. 6. 2. 1 Conducted noise immunity Noise is specified as a periodic and random distribution of frequencies covering a band from DC to 10 MHz. Maximum allowed noise values given below are peak-to-peak measurements and apply at the drive power connector. +5v +12v = = 250 mV pp from 100 Hz to 20 MHz. 250 mV pp from 20 KHz to 5 MHz. 6. 2. 2 Power sequencing The drive does not require power sequencing. The drive protects against inadvertent writing during power-up and down. Savvio 10K. 3 SAS Product Manual, Rev. D 23 6. 2. 3 Current profiles The +12V and +5V current profiles for the Savvio 10k. 3 drives are shown below. Figure 16. Current profiles for 300GB models 24 Savvio 10K. 3 SAS Product Manual, Rev. D Figure 17. Current profiles for 146GB models Note: All times and currents are typical. See Tables 2 and 3 for maximum current requirements. Savvio 10K. 3 SAS Product Manual, Rev. D 25 6. 3 Power dissipation 300 GB models in 3 Gbit operation Typical power dissipation under idle conditions in 3Gb operation is 3. 79 watts (12. 93 BTUs per hour). To obtain operating power for typical random read operations, refer to the following I/O rate curve (see Figure 18). Locate the typical I/O rate for a drive in your system on the horizontal axis and read the corresponding +5 volt current, +12 volt current, and total watts on the vertical axis. To calculate BTUs per hour, multiply watts by 3. 4123. Figure 18. 300GB (at 3 Gbit) DC current and power vs. input/output operations per second 26 Savvio 10K. 3 SAS Product Manual, Rev. D 300GB models in 6 Gbit operation Typical power dissipation under idle conditions in 6Gb operation is 3. 82 watts (13. 03 BTUs per hour). To obtain operating power for typical random read operations, refer to the following I/O rate curve (see Figure 18). Locate the typical I/O rate for a drive in your system on the horizontal axis and read the corresponding +5 volt current, +12 volt current, and total watts on the vertical axis. To calculate BTUs per hour, multiply watts by 3. 4123. Figure 19. 300GB (at 6 Gbit) DC current and power vs. input/output operations per second Savvio 10K. 3 SAS Product Manual, Rev. D 27 146GB models in 3 Gbit operation Typical power dissipation under idle conditions in 3Gb operation is 3. 43 watts (11. 70 BTUs per hour). To obtain operating power for typical random read operations, refer to the following I/O rate curve (see Figure 18). Locate the typical I/O rate for a drive in your system on the horizontal axis and read the corresponding +5 volt current, +12 volt current, and total watts on the vertical axis. To calculate BTUs per hour, multiply watts by 3. 4123. Figure 20. 146GB (at 3 Gbit) DC current and power vs. [. . . ] It provides self-service access to critical applications, personalized content and the tools that allow our partners to manage their Seagate account functions. Submit pricing requests, orders and returns through a single, password-protected Web interface-anytime, anywhere in the world. spp. seagate. com spp. seagate. com supports Seagate resellers with product information, program benefits and sales tools. You may register for customized communications that are not available on the web. [. . . ]