User manual MAXTOR ST15230W VOLUME 1

[. . . ] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HAWK 4 Family: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Wide bus) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ST15230W/WD/WC/DC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Product Manual, Volume 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HAWK 4 Family: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Wide bus) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ST15230W/WD/WC/DC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Product Manual, Volume 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . © 1996 Seagate Technology, Inc. All rights reserved Publication Number: 77767479 Rev. E March 1996 Seagate®, Seagate Technology® and the Seagate logo are registered trademarks of Seagate Technology, Inc. HawkTM, SeaFAXTM, SeaFoneTM, SeaTDDTM and SeaBOARDTM are trademarks of Seagate Technology, Inc. [. . . ] Nonoperating The limits of nonoperating shock shall apply to all conditions of handling and transportation. This includes both isolated drives and integrated drives. The drive subjected to nonrepetitive shock not exceeding 60 g's at a maximum duration of 11 ms (half sinewave) shall not exhibit device damage or performance degradation. Shock may be applied in the X, Y, or Z axis. Packaged The drive as packaged in a single or multiple drive pack of gross weight 20 pounds (8. 95 kg) or less by Seagate for general freight shipment shall withstand drop test from heights listed below against a concrete floor or equivalent. For additional details refer to specifications 30190-001 (under 100 lbs) or 30191001 (over 100 lbs). Package Size Drop Height 3 3 48 in (121 cm) 600 - 1800 in (9, 832 - 29, 502 cm ) 24 Product Manual - Hawk 4 Family (Wide) SCSI-2 (Volume 1), Rev. E ______________________________________________________________________________________ B A E A 1 D E1 C D1 SE AG AT E Z Y X Figure 7. 4. 4-1. Recommended mounting SE AG AT E B1 B1 A1 B A Z X Y C1 E1 D1 C1 E D C Product Manual - Hawk 4 Family (Wide) SCSI-2 (Volume 1), Rev. E 25 _____________________________________________________________________________________ 7. 4. 4. 2 Vibration a. Operating The drive, as installed for normal operation, shall operate error free while subjected to continuous vibration not exceeding 5-22 Hz @ 0. 02 inches (0. 51 mm) displacement 22-400 Hz @ 0. 5 g Vibration may be applied in the X, Y, or Z axis. Nonoperating The limits of nonoperating vibration shall apply to all conditions of handling and transportation. This includes both isolated drives and integrated drives. The drive shall not incur physical damage or degraded performance as a result of continuous vibration not exceeding 5-22 Hz @ 0. 081 inches (2. 05 mm) displacement 22-400 Hz @ 2. 00 g's Vibration may be applied in the X, Y, or Z axis. 7. 4. 5 Air cleanliness The drive is designed to operate in a typical office environment with minimal environmental control. 7. 5 7. 5. 1 Electromagnetic compatibility Electromagnetic susceptibility As a component assembly, the drive is not required to meet any susceptibility performance requirements. It is the responsibility of the system integrator to perform those tests required to ensure that equipment operating in the same system as the drive does not adversely affect the performance of the drive. See section 6. 1. 2, and see Table 7. 2-1, DC Power Requirements. 26 Product Manual - Hawk 4 Family (Wide) SCSI-2 (Volume 1), Rev. E ______________________________________________________________________________________ 7. 6 Mechanical specifications The following nominal dimensions are exclusive of the decorative front panel accessory. Refer to Figure 7. 61 for detailed mounting configuration dimensions. Height: Width: Depth: Weight: 1. 62 in 4. 00 in 5. 74 in 2. 1 pounds 41. 1 101. 6 145. 8 0. 93 mm mm mm kilograms [4] C [3] G L [1] A D F Notes: [1] Mounting holes three on each side, 6-32 UNC. Max screw length into side of drive 0. 15 in. [. . . ] It also includes basic information to assist in obtaining service for the drive. Product Manual - Hawk 4 Family (Wide) SCSI-2 (Volume 1), Rev. E 67 _____________________________________________________________________________________ 13. 0 Accessories All accessories are designed for implementation by the customer. 13. 1 Front panel kit Same as 12. 1 but includes all mounting hardware to support field installation. 13. 2 Additional Installation Guide copies The Installation Guide (P/N 77767477) is usually included with each drive shipped, but extra copies may be ordered. 68 Product Manual - Hawk4 Family (Wide) SCSI-2 (Volume 1), Rev. [. . . ]