User manual MAYTAG MAF9801

[. . . ] Use & Care Guide Washing Machine MAYTAG MAF 9801 CONTENTS READ FIRST 1 Before washing the first time 2 Safety instructions Page 3 4-5 programmes 11 Making own washing programmes Page 10 Consumption values - Pre-set washing 18 19-24 General. Disposal. 3 Children's safety 6 Child-safe washing. Child lock on Start/ Stop and Menu buttons. 4 Parts of the washing machine 5 Detergent compartment 6 Panel 7 LC Display INSTALLATION 7 7 8 8 General, Available settings and options, Create your own washing programmes, Interrupt input, Reset programme, Available types of programme, Menu system for altering pre-set programmes CARE 12 Care and Cleaning 26-27 See instructions for installation. WASHING 8 Before washing 9-11 Cleaning the coin trap and drain pump, Cleaning the detergent compartment, Cleaning the outside of the machine, Cleaning the inside of the machine to prevent problems with odour, Clean-out recess under the ridges. 13 Trouble shooting 28-30 Sorting the washing. [. . . ] Close the door and press to start the programme. Delayed start is disconnected automatically at the end of the programme. If you wish to run a temporary spin or rinse programme without altering P1 - P4 , you can do the following: 1. Index forward with until Spin or Rinse appears in the display. The selected programme appears in the display. Adjust the spin speed by indexing forward with if required. If you wish to have Spin or Rinse as one of the four pre-set programmes, see Chapter 11, Making your own washing programmes. IMPORTANT If you store a programme by mistake, you can reset it to its settings at the time of delivery; see Reset programme in Chapter 11, Making your own washing programmes. 17 10 CONSUMPTION VALUES - PRE-SET PROGRAMMES The following conditions apply for the consumption values indicated below: Temperature of incoming water: 15ºC. Element power: 2000 W. PROGRAMME WASHING/ TEMPERATURE (1) AMOUNT OF WASHING (2) 1/1 (6, 0 kg) WATER CONSUMP- ENERGY CONSUMPTION (ca litre) 54 TION (ca kWh) 1, 14 PROGRAMME TIME (ca min. ) 130 P1 Normal P2 White/Coloured P3 Quick P4 Hand Cotton, linen, 60 °C Cotton, linen, 40 °C Polyester, cotton/polyester, 40 °C Wool/Hand, IWS, Superwash, 30 °C 1/1 (6, 0 kg) 54 1, 05 90 1/2 (3, 0 kg) 22 0, 30 35 1/3 (2, 0 kg) 54 0, 30 40 (1) All programmes are set to the highest available spin speed. (2) The machine can handle a maximum load of 6, 0 kg. 18 11 MAKING OWN WASHING PROGRAMMES GENERAL Change programme We have preset P1 - P4 with the most common washing programmes. These programmes usually suit most users. You can adjust the temperature and the spin speed temporarily, and you can run a spin or rinse programme temporarily without reading this Chapter; see Chapter 9, Washing. You can also create your own programmes to suit you and your washing needs even better. You can select a different type of programme, for example Heavy with pre-wash, Wool or Light. You can also alter settings such as temperature and spin speed and options such as Pre-soak, Delayed start and E2 Eco/Efficiency. Tables containing a description of all programme types, settings and options are included later in this Chapter. In this Chapter we tell you how to replace one or other of the pre-set programmes with a programme of your own. By storing the programme, it will then be accessible simply by pressing a button every time you wish to use the washing machine. Temporary programme You can also make a temporary change of programme type, settings or options. The change is not stored in this case, but is deleted when you switch off the machine or when you select one of the pre-set programmes. SETTINGS AND OPTIONS FOR THE FOUR PRE-SET PROGRAMMES AT THE TIME OF DELIVERY Programme information type Settings and options ed sta rt (A) cy ficien level e oak Pre-s Anticreas °C rature amme Spin spe r/min ed rinse Progr Delay Super E2 Ec o/Ef Temp e P1 P2 P3 P4 Normal White/Coloured Quick Hand (B) 60°C 40°C 40°C 30°C 1800 0 tim 1200 0 tim 800 800 0 tim 0 tim Off Off Off Off Off Off (B) (B) Off Off Off Off Off Off Off Off (A) 0 hours means that the option is not activated. This option can only be changed temporarily. (B) This option is not available for this programme type. (C) This option is always on for this programme type and cannot be switched off. High water Off Off Off (C) WM5566-OPT 19 AVAILABLE SETTINGS AND OPTIONS Setting/Option Programme types Description Available programmes are described in a separate table in this Chapter. Change of programme type resets all options and settings to their original values. Here you select the temperature to be displayed when you For some types of programme, only temperatures between 30 and 40°C can be have selected the pre-set programme (P1-P4). It is always possible to adjust the temperature by pressing selected. [. . . ] Press the Enter button five times, and then press the P2 button five times. These ten presses must be completed within 15 seconds. Within three seconds after pressing the P2 button for the last time, you must then use the buttons to index to your desired alternative. RESET PROGRAMME If you wish to revert to the settings which a preset programme had at the time when the dryer was supplied, you can reset the programme. Hold down the programme button (P1-P4) for the programme that you wish to reset. [. . . ]