User manual MAYTAG MAV5920AGW

[. . . ] MAV-1 Use & Care Guide Table of Contents Important Safety Instructions 1-2 Operating Tips . 3-4 Using the Controls 3 Speed Select Models . 15 Guide d'utilisation et d'entretien . 6 2621890 www. maytag. com Litho U. S. A. ©2005 Maytag Appliances Sales Co. Important Safety Instructions Installer: Please leave this guide with this appliance. [. . . ] Select the appropriate cycle and options for the load. The Fill indicator light will illuminate and the washer will start to fill. Note: The lid must be completely closed in order to operate the washer controls. STEP 1 Select Water Level Determine the selected setting based on clothes load size. Selection should provide sufficient water to permit clothes to circulate freely during agitation. It may become necessary, due to bulky fabrics, to adjust the water level after agitation begins. To adjust the water level, turn the Infinite Water Level control to reset and then back to the desired setting. WATER LEVEL SETTING Mini Small Medium Large Super LOAD SIZE 1/4 Full 1/4 - 1/3 1/3 ­ 1/2 1/2 ­ 2/3 3/4 ­ Full WASH/RINSE TEMPS Hot/Cold (select models) Warm/Warm (select models) Warm/Cold (select models) Cold/Cold LOAD TYPE White and heavily soiled, color-fast items. Moderately soiled, colored items; most wrinkle-free items. Brightly colored, lightly soiled items; washable woolens. Note: Items must circulate freely for best results. Automatic Temperature Control (A. T. C. ) provides the optimal wash water temperature for cleaning. To save energy, this washer will regulate wash water temperatures by mixing hot and cold water to reach the proper water temperature. WASH/RINSE TEMPS LOAD TYPE STEP 2 These settings feature Automatic Temperature Control: Select Wash/Rinse Temperature Your washer gives you a choice of hot, warm or cold water for washing and cold water or warm water (select models) for rinsing. Use the chart as a guide. Saves energy by adding cold water ATC Hot/Cold, to the hot water from your water ATC Warm/Cold ATC Warm/Warm heater. Provides optimum cleaning (select models) at lower temperatures. May add hot water to the incoming cold water as the washer fills. This ATC Cold/Cold assures that the water will be warm enough to properly activate detergent. 9 Control features vary by model. STEP 3 STEP 4 Soil Selection Your washer has selectable soil level settings. SOIL SELECTION Light Normal LOAD TYPE Use for cleaning lightly soiled loads. Use for cleaning moderately soiled loads. This setting will be appropriate for most loads. Use for cleaning stained, heavily soiled sturdy loads. Fabric Selection Select the appropriate fabric cycle for the type of load by turning the cycle selector dial until the indicator light by the desired fabric selection is illuminated. WASH/SPIN SPEED Quick Wash Gentle/Fast Hand Wash Ex. Gentle/Slow FABRIC SELECTION Heavy Extra Heavy For lightly soiled or wrinkled garments needed quickly. Provides intermittent agitation and soak. For wool, silk, and other hand-wash-only fabrics. [. . . ] Products purchased for commercial or industrial use. The cost of service or service call to: a. Instruct the user on the proper use of the product. Transport the appliance to the servicer and back. [. . . ]