User manual MAYTAG MDE9801

[. . . ] Use & Care Guide Tumble Dryer MAYTAG MDE 9701 MDE 9801 CONTENTS READ FIRST 2 Safety instructions Page 4 CARE 10 Care and cleaning Page 16-18 1 Before tumble drying for the first time 3 General, Installation, Safety, Interrupting a programme, Transport/Winter storage, Packing materials, Disposal 3 Child safety 4 Parts of the tumble dryer 5 Panel 6 Option buttons INSTALLATION 5 Cleaning the lint filter, Draining the condensation water container, Cleaning the outside of the machine, Cleaning the fan, Cleaning the condenser PROBLEMS?11 Trouble shooting 20-21 General, Child lock on Start button 6 7 7 Machine will not start, Overheating protection, Drying takes too long, Fault indication on the display, Normal indications on the display MISCELLANEOUS See Installation Instructions TUMBLE DRYING 7 Before tumble drying 8-10 12 Technical information 23 25 26 27 Technical data, Standard tests 13 Service and guarantee 14 Quick guide 15 Index Spin-dried?Recommended washing marking, Sorting fabrics, programmes, Options, Temperature, Drying time 8 Tumble dry 11-14 15 Tumble dry ­ step-by-step 9 Consumption values 2 1 BEFORE TUMBLE DRYING THE FIRST TIME READ THE OPERATING INSTRUCTIONS NOTE. Please read through this Use and Care Guide before attempting to use the machine, particularly Chapter 2, Safety instructions, and 3, Children's safety. DO NOT TUMBLE-DRY When you start the tumble dryer the first time, or after a long period when it has not been in use, you may hear a light rumbling noise. This is quite normal and the sound will disappear after a few drying operations. Some fabrics are sensitive to tumble drying. [. . . ] During cooling, is indicated in the display together with the number of minutes remaining. If the Anti-crease option is selected, the drum will rotate every minute for a certain period after cooling. The text is indicated in the display during this period. The programme will stop as soon as the door is opened. DURING THE DRYING PROGRAMME If you wish to interrupt or change the programme The text in the display indicates that the programme has ended. If the Anti-crease option is selected, the drum will rotate every minute for a certain period after cooling. The text is indicated in the display during this period. The programme will stop as soon as the door is opened. - Clean the lint filter after each tumble drying operation. - Drain the condensation water container. WARNING 8 DRYING PROGRAMME ENDED Hold down the button for three seconds. An extinguished LED next to the button indicates that the programme has been interrupted. Changing the programme selector knob after starting will not affect the programme. Putting in or taking out washing If the lint filter becomes completely clogged, this may cause the overheating protection to trip. The filter must then be cleaned and the overheating protection must be reset before restarting the machine; see Chapter 11, Trouble shooting. Cleaning the lint filter 1. Grasp the filter handle and pull it towards you. Pull the filter up out of the holder. 2 If you wish to put in or take out washing after you have started the machine, opening the door will cause the machine to stop automatically. Put in more washing, close the door and press the button. The programme will restart automatically from the point at which it was interrupted. 3. Open the filter and brush away any lint with your hand. Fold the filter together and replace it in the filter holder. 1 13 The filter may require cleaning if lime scale deposits are present; see Chapter 10, Care and Cleaning. Draining the condensation water container 9 AFTER TUMBLE DRYING Turn off the main switch . Take out the clothes, and close the door to prevent small children from crawling into the machine. The condensation water container must be emptied after each tumble drying. Pull out the condensation water container, drain any water and replace the container. If the condensation water container becomes too full, the programme will be interrupted and will appear in the display. Drain the container and press the button, and the programme will now continue from where it was interrupted; see also Chapter 11, Trouble shooting, heading Fault indications. NOTE Do not pull out the condensation water container while the tumble dryer is running. TIP The condensation water is soft, which makes it suitable for use in a steam iron. [. . . ] This fault message can also be displayed if you are already operating with dry clothes or an empty machine. The message should disappear if you open the door. If not, call service. NORMAL INDICATIONS ON THE DISPLAY Display shows Explanation No programme selected. Delayed start is selected, and the programme has started. [. . . ]