User manual MC CULLOCH M14597TC

[. . . ] M145-97TC Euro Please read these instructions carefully and make sure you understand them before using this machine. Prezechowywanie Uskladnenie Tárolás 3 18 33 41 43 56 92 95 We reserve the right to make changes without prior notice. Safe Operation Practices for Ride-On Mowers III. Be familiar with the controls and the proper use of the equipment. [. . . ] Total time taken is not greater, since higher drive speed can be selected without affecting the cutting results. The cutting results will be worse since the wheels will sink into the soft lawn. Spray the cutting unit with water underneath after use. To turn off the alarm disengage the attachment clutch control. • Position tractor in location you wish to dump bagger. € Ensure that the transaxle is in the neutral position. Pull handle forward to raise bagger and dump clippings. € To continue mowing, move unit forward to ensure bagger is completely lowered and in proper operating position which will allow mower to operate. 51 5 To convert mower: (Converting to mulching or rear discharging will require the purchase of these accessories. ) To mulching Place deck into the high cut position. remove bagger or optional rear discharge deflector. Insert plug assembly through back plate and into the mower deck chute adaptor. € Retain the plug assembly by connecting the two straps into the holes provided on the bagger support arms. • Replace bagger or optional rear discharge deflector to allow mower to operate. € • • To rear discharging • Place deck into the high cut position. € Attach the chute by applying the two wingnuts to the flange of the chute. € Install the discharge deflector to the backplate by screwing the four (4) wing screws into the threaded inserts located in the backplate. • Tighten the wing screws securely. To bagging • Place deck into the high cut position. • Remove the rear discharge deflector or mulching plug. € Insert the discharge chute into the opening in the backplate and onto the mower deck adaptor. € Attach the chute to the tractor by applying the two wingnuts to the flange of the chute. [. . . ] € Pull back the lock collar of the nozzle adapter to disconnect the adapter from the nozzle washout port. € Move the tractor to a dry area, preferably a concrete or paved area. Place the attachment clutch control in the “Engaged” position to remove excess water and to help dry before putting the tractor away. WARNING: A broken or missing washout fitting could expose you or others to thrown objects from contact with the blade. [. . . ]