User manual MCCULLOCH HT51-510

[. . . ] Dear Customer, Thank you for purchasing a McCulloch product. With proper operation and maintenance, it will provide you with years of service. In order to make the best use of your investment, be CERTAIN to familiarize yourself with the contents of the ENTIRE user manual before attempting to operate and maintain your unit. Be sure to carefully follow the step-by-step illustrations in this manual to start, operate and maintain your new product. [. . . ] Non-detergent and 2-stroke engine oils will damage the engine and are not recommended. Check the oil level BEFORE EACH USE with the generator on a level surface with the engine stopped. Use McCulloch 4-stroke oil, or and equivalent high detergent, premium quality motor oil certified to meet or exceed U. Other viscosities shown in the chart may be used when the average temperature in your area is within the indicated range. Check the oil level (B) by inserting the dipstick into the filler neck without screwing it in. If the level is low, fill to the top of the oil filler neck with the recommended oil. Secure the wheel onto the axle using the cotter pin (G). 5-2D) N Repeat steps 2 through 4 for the other wheel assembly. LEG ASSEMBLY I Attach 2 legs (A) to the bottom of the generator frame (B) using nuts, flat washers, spring washers and bolts providS ed. Do not fill to top: Leave some space for fuel expansion. Refuel in a well-ventilated area with the engine stopped. To stop the engine in an emergency, turn the electric start key to the OFF L position. Turn the electric start key to the OFF position. Ground Terminal The generator ground terminal is connected to the frame of the generater, the metal non-current carrying parts of the generator, and the ground terminals of each receptacle. Connections to a Building's Electrical System Connections for standby power to a building's electrical system must be made by a qualified electrician. The connection must isolate the generator power from utility power, and must comply with all applicable laws and electrical codes. Improper connections to a building's electrical system can allow electrical current from the generator to backfeed into the utility lines. Such backfeed may electrocute utility company workers or others who contact the lines during a power outage. consult the utility company or a qualified electrician. Improper connections to a building's electrical system can allow electrical current from the utility company to backfeed into the generator. When utility power is restored, the generator may explode, burn, or cause fires in the building's electrical system. In some areas, generators are required by law to be registered with local utility companies. [. . . ] 1L) L I S Used motor oil may cause skin cancer if repeatedly left in contact with the skin for prolonged periods. Although this is H unlikely unless you handle used oil on a daily basis, it is still advisable to thoroughly wash your hands with soap and water as soon as possible after handling used oil. Please dispose of used motor oil in a manner that is compatible with the environment. We suggest you take it in a sealed container to your local service station or recycling center for reclamation. [. . . ]