User manual MCCULLOCH MCS2001

[. . . ] For problems or questions, DO NOT return this product to the store. PLEASE READ For your own safety please read this manual before attempting to operate your new unit. Failure to follow instructions can result in serious personal injury. Spend a few moments to familiarize yourself with your shredder before each use. [. . . ] before starting the machine , check that the cutting chamber is empty. Motor should be kept clean of debris and other accumulations. Keep all guards and deflectors in good working condition. stand clear of discharge chute at all times. Do not over reach and keep face and body back form the feed opening. Never pull the machine by the power cord and keep cord away from water or sharp edges. Disconnect the power cord when the machine is not in use. If machine should become clogged, switch off the motor, disconnect the power cord, make sure all moving parts are completely stopped before cleaning clogged debris. Ensure the power cord is always in good condition. A cord with broken insulation is extremely dangerous and can result in fire, electric shock or serious personal injury. EXTENSION CORD - Use only three-wire outdoor extension cords that have three-prong grounding plugs and grounding receptacles that accept the appliance's plug. 5m 120 50 feet / 15m 100 feet / 30m * American Wire Gauge WIRE SIZE REQUIRMED 14 A. When using the chipper shredder, an extension cord of adequate wire size must be used for safety and to prevent loss of power and overheating. The extension cord must be specifically intended for outdoor use and marked "SJ" or "SJT" and with the suffix "WA". The operation of any tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before operating power tool, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Never place hands into Top Hopper, Side Chute or Discharge Chute as serious injury will occur (Figure 2-1). Use of these personal safety items is highly recommended to reduce the risk of accidental injury (Figure 2-2). NOTE: Locate small bag of hardware containing two Allen hex screws, two large flat washers, two small flat washers and two split pins. Place one wheel on the axle followed by a large flat washer. Secure by inserting a split pin through the hole in the end of the axle, bend the ends over using pliers. [. . . ] This warranty does not apply to accessories, normal maintenance, wear items or adjustment(s) of the product set forth in the User Manual(s). Repair or replace components which have failed within the duration of the applicable warranty period at no cost to the User. Ensure that the authorized repair station is reimbursed for parts and labor costs incurred due to performance of a warranty repair in accordance with established warranty policies and procedures. The User must deliver or ship the McCulloch product covered under this warranty to the dealer from whom it was originally purchased or to the nearest McCulloch Authorized service center. [. . . ]