User manual MCINTOSH MCMR67

[. . . ] Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. [. . . ] Press and hold the MCMR67 Front Panel EQ BYPASS/ SETUP Push-button to enter the Setup Mode. The number after the character "V" is the Firmware number. To exit the Setup Mode, press the EQ BYPASS/ SETUP Push-button. SETUP: SOURCE INPUT TUNER : RCA Figure 3 4. To exit from the Setup Mode, press the EQ BYPASS/SETUP Push-button. The LED above the TRIM Push-button will extinguish and the Front Panel Display will revert back to its normal display. Refer to figure 1. Default Settings The Default Settings Chart below indicates the Function Name, Default Setting and the Page Number for additional information. Default Settings Function Name McIntosh MCMR67 SOURCE INPUT (connector type) LEVEL (Trim) DISPLAY (Brightness) PASSTHRU TRIG 1 Output (Action) TRIG 2 Output (Action) COMM PORT (Baud Rate) REMOTE (Codes) Setting V_. _ _ - _. _ RCA 0. 0dB 3 OFF MAIN MAIN 115200 NORM Page No. 13 13 14 15 15 16 16 17 17 Source Inputs Reassignment The MCMR67 provides the ability to reassign the nonPhono Inputs (High Level) to either one of two Balanced Inputs or one of the four Digital Inputs. In the first example, the CD2 Input will be reassigned from the unbalanced CD2 (RCA Jacks) to the BALANCED 1 (XRL Connector). SOURCE: TUNER 15% Figure 1 2. Press and hold the EQ BYPASS/SETUP Pushbutton until the Front Panel Information Display indicates "McIntosh MCMR67, V1. 00 - 1. 0 or higher Firmware. At this time the LED McIntosh MCMR67 V1. 00 - 1. 0 Figure 2 above the TRIM Push-button will be illuminated. Then press the OUTPUT 2 / MENU Push-button until the Setup Menu item "LEVEL: CD 0. 0dB" appears on the Front Panel Information Display. Refer to figure 9. Note: The range of adjustment is ± 6dB. The signal Level present at the RECORD OUT Jacks is unaffected by any changes in the Setup Level adjustment. The level adjustments made are retained in permanent memory. They can be changed during operation of the MCMR67 by performing a Trim Level Procedure, refer to page 19 for additional information. The second example will illustrate reassigning the SRVR (Server) Input from SRVR/REC Input (RCA Jacks) to the DIGital 1 Optical Input. Rotate the INPUT Control until "SRVR : RCA" appears on the Front Panel Information Display. Refer to figure 7. LEVEL: CD Min || Figure 9 0. 0dB Max SETUP: SOURCE INPUT SRVR : RCA Figure 7 3. Rotate the INPUT Control until "LEVEL: SRVR 0. 0dB" appears on the Front Panel Information Display. If necessary, rotate the VOLUME/ADJUST Control to obtain the same volume level as the CD Input by switching between the two Inputs using the INPUT Control. Note: The CD Input is serving as a reference level or choose another source frequently listened to. The Input Source should be set to a reference Level (Trim) of 0. 0dB. 14 Setup, con't Display Brightness 4. Rotate the INPUT Control until "LEVEL: SRVR _. _" appears on the Front Panel Information Display. [. . . ] It also shows the range of adjustment of frequencies for each of the Equalizer Controls of the MCMR67 at the +6dB and -6dB points. Passthru When the MCMR67 is connected together with a McIntosh Multichannel A/V Control Center or Surround Decoder and has the PASSTHRU MODE activated, it will automatically turn-on when the A/V Control Center or Surround Decoder is turned On. It will indicate on the Front Panel Alphanumeric Display "PASSTHRU". Refer to figure 69. Fundamental Frequencies of Acoustical Musical Instruments and the Human Voice SOPRANO CONTRALTO TENOR BARITONE BASS PICCOLO FLUTE OBOE ENGLISH HORN B CLARINET BASS CLARINET ALTO SAXOPHONE IN B BASSOON CONTRABASSOON B TRUMPET FRENCH HORN IN F TENOR TROMBONE BASS TROMBONE IN F TUBA SMALL MEDIUM LARGE HARP GUITAR VIOLIN VIOLA CELLO BASS PIANO STRINGS KETTLE DRUMS BRASS WOODWINDS SINGING VOICE PASSTHRU Figure 69 The MCMR67 OUTPUT 1 / OUTPUT 2 Front Panel Pushbuttons are active when in the Passthru Mode. [. . . ]